A lil project i've been working on...
06-06-2009, 09:35 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Posts: 2,436
Teknics is gonna upload the pics for me... they are from a few months back.. the car is 99% finished now. Just needs the front brakes and windshield installed. 
06-06-2009, 09:55 PM
#2
Senior Member
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
http://gallery.me.com/teknics#100103
main gallery to see them all in one place, will be uploading each one in this topic as well.
kevin.
main gallery to see them all in one place, will be uploading each one in this topic as well.
kevin.
06-06-2009, 10:11 PM
#5
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Posts: 2,436
all of the tubing under the hood is now painted grey to match the exterior of the car... looks much better now.
06-06-2009, 11:48 PM
#6
Member
Join Date: Apr 2009
Location: Knoxville TN
Posts: 98
Sure would have liked Mazda to have put that powerplant under the hood of my car! Well, maybe not. It would probably get me into more trouble than I need & shorten my life span!
Takes alot of dedication to go to the lengths that you have! Kudos to you sir!
Takes alot of dedication to go to the lengths that you have! Kudos to you sir!
06-08-2009, 08:57 AM
#8
Senior Member
Thread Starter
Join Date: Mar 2003
Location: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Posts: 2,436
Thanks, there will be LOTS of videos once it's finished. It sounds awesome at idle, and hopefully i'll know what it sounds like at full blast soon.
Also thinking about replacing the front A-arms with tubular arms with heim joints at somepoint. Need to check to see if anyone already makes them before i decide to build them.
Also thinking about replacing the front A-arms with tubular arms with heim joints at somepoint. Need to check to see if anyone already makes them before i decide to build them.
06-08-2009, 11:25 AM
#9
Senior Member
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
Originally Posted by GreyGT-C' post='922703' date='Jun 8 2009, 09:57 AM
Thanks, there will be LOTS of videos once it's finished. It sounds awesome at idle, and hopefully i'll know what it sounds like at full blast soon.
Also thinking about replacing the front A-arms with tubular arms with heim joints at somepoint. Need to check to see if anyone already makes them before i decide to build them.
Also thinking about replacing the front A-arms with tubular arms with heim joints at somepoint. Need to check to see if anyone already makes them before i decide to build them.
if you find some nice aftermarket front upper arms let me know, i need a new r/f one but have been hesitating in buying it cause id like to just upgrade instead of go oem.
kevin.
