Just Got My Fd Going Now Need Some Help
#1
OK i bought a fd that had an engine fire, after replacing EVERYTHING, when i say that every electrical connector and harness was replaced. all i need are those one way valves (check valves) so if anyone has those for a good price or knows where i can get them for cheap let me know. i know there are 7 of them.
now for the problems, these might be because i have no check valves i don't know though if any body does please let me know.
starts, idles good with a slight miss.
smokes out of the exhust and my air/fuel gauge reads rich.
if i bring the idle up slow its fine, but if i try and rev it fast it back fires.
oh and me gauge cluster doesn't work.
what i have checked:
fuse all good
all lines are good no leaks (vacume lines)
engine had 110 psi compression on all rotor faces (on cold engine, at high altitude).
please if any one could help it would be great
Thanks
Robert
now for the problems, these might be because i have no check valves i don't know though if any body does please let me know.
starts, idles good with a slight miss.
smokes out of the exhust and my air/fuel gauge reads rich.
if i bring the idle up slow its fine, but if i try and rev it fast it back fires.
oh and me gauge cluster doesn't work.
what i have checked:
fuse all good
all lines are good no leaks (vacume lines)
engine had 110 psi compression on all rotor faces (on cold engine, at high altitude).
please if any one could help it would be great
Thanks
Robert
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)