Hey.

I am located in miami Florida and I bought a 1993 rx7 project that been sitting for while. I have done few things to get the car back on the road. The car is converted to single turbo and I was told engine is freshly rebuilt (going to do compression test soon)
the car been sitting for while so I did few things

cleaned gas tank
cleaned and replaced some injectors ( there is 6 on this car)
installed a new fuel pump
oil change and sparkplugs
flush radiator
clean throttle bodies
Installed a new battery.

the car has power but I am not getting power to started soliond. The car has a micro tech ecu and harness.

The clutch switch is unplugged and i Can not find the male side (harness) I am guessing it is already been bypassed but I can not confirm as I can not locate the wires on harness side.
I bypassed the alarm blue relay (connect blue/black wire to blue and white)
I fixed some of the wires on the ignition ( last owner attempted to installed starter button ) I returned everything to stock.


is the ecu in Involved in sending a single to starter ?

I am shipping ecu to microtech in Australia to confirm the condition of it.