jackdhammer

How high can you run the stock sequentials without affecting their life span?

vosko

12psi

turbovr6

if you have all the right mods you can go higher, I ran about 14-16psi, with an occasional spirited 18psi

Fd3BOOST

I havr run mine on 16 psi before. I even did that on stock fuel maps with no blowin up!



I wouldnt recomend it though

qwester007

12

jspecracer7

I'm leaning around 12~13 psi. Higher than that and the turbo's will work their *** off....which of course shortens their life substantially.



Just go single turbo and be done with it.

rx7machine

Humm.. 12psi.. so, is there any point to run a single turbo if you're going to stay at 12psi or under? (sorry that was off-subject)

rx7trix

Thank you!!! thats what I keep telling people!! 12psi is 12 psi I dont care if you blow it through a straw or a leaf blower!! I like the sequential setup because you dont have the lag from the single.. the twins are more responsive. I'd only go single if I had atleast 850s all around, atleast a street port and some 3mm seals then I'd boost that **** to 17psi and let it rip. (obviously you'd need a fuel map for your ecu with this setup you'll need more fuel )

93 R1

12 psi on a single will make more power then stock twins at 12 psi, thats why

NoCal

I don't get how...