hey everyone, i have seem alot of mod on the fd on this site. but i have not seem alot of getto fix on the fd. would anyone willing to share the hiden parts of their fd. personally, i got a few, i will share first so the rest of you won't feel so bad.

i got eletrical tape on my stock intercooler ducting as block off plate, hey it stop the air.



i got some L-brakcet(source unknown, maybe form some old shelving) holding up my glove box. before the right side of it was broken, but now it look good, you can't tell the brakcet is there.



i can get some pic later. so we all can have a good laugh.

 

be careful with that electrical tape, charge air gets really hot and really strong fary fast. i used to have the same mod except i used silicone tape and ducttape.



something ghetto yet somewhat clever thing i did to my car is on the turbo outlet hose.



the diameter was too small so i superglued a smaller couper inside the larger couper and made a transition hose.



for my blowoff valve, i couldnt find anyone to weld a flange onto my pipes so i cut a hole out of my intercooler the same size as the hole on my blowoff valve, and used a cut up coupler as a gasket... works great

 

[quote name='FikseRxSeven' date='Jul 17 2005, 09:59 AM']be careful with that electrical tape, charge air gets really hot and really strong fary fast. i used to have the same mod except i used silicone tape and ducttape.



something ghetto yet somewhat clever thing i did to my car is on the turbo outlet hose.



the diameter was too small so i superglued a smaller couper inside the larger couper and made a transition hose.



for my blowoff valve, i couldnt find anyone to weld a flange onto my pipes so i cut a hole out of my intercooler the same size as the hole on my blowoff valve, and used a cut up coupler as a gasket... works great


[/quote]



do you have a single setup. ??

 

yes

 

first of all, its spelled ghetto

 

[quote name='nopistons94' date='Jul 17 2005, 10:26 AM']first of all, its spelled ghetto


[/quote]



oops my bad

 

[quote name='chinoflyer' date='Jul 17 2005, 01:30 PM'] oops my bad


[/quote]

 

I've got duct tape on my intake duct work which is 3" dryer duct...but damn that duct is soooo freakin' crucial with my single, SMIC set-up

 

I have duct tape on my intake as well where that little round canister used to sit for the my AC. Took the AC out so just taped it up.