Well my fuel pump gave out Saturday just shy of my 1 year anniversery of FD ownership, so I ordered a new Walbro High flow pump monday, it arrived today. I just finished getting it all back together, but the car still won't fire. It cranks and I can hear the pump now, but it just won't go. Could I have flooded it in a couple of tries?



Also, is there some sort of priming i need to do after the install? I don't have the fuel section of the FSM handy to reference.



Sorry to post a new thread on what I'm sure is a much covered topic, but I can't get the search function to work for some reason, just gives me a blank page.

to prime it, just turn the key to the on position, and the pump automatically comes on for 3 seconds.



i thought my fuel pump died, but it was actually a short in the wiring on that L shaped connector on the fuel pump access panel

Well I hope I didn't flood it trying to get it started, I'm too tired to jack the car up and check the plugs tonight, guess I'll do it tomorrow.

I got her started, found this on robinettes site to prime the pump



http://robrobinette.com/release_fuel.htm#P...20Fuel%20System



thanks

[quote name='Section8' date='May 25 2005, 08:51 PM']Well I hope I didn't flood it trying to get it started, I'm too tired to jack the car up and check the plugs tonight, guess I'll do it tomorrow.


[/quote]







You don't change the plugs from overtop? Maybe it's just me that does that, or is it easier from under? I also get to tired to jack it up all the time thats why I go from over top and it takes me about 5 min to change plugs.



Don't worry about making a new post man, this ain't RX-7CLUB. No one will yell at you here, but it's cool that you did try to search first brotha https://www.nopistons.com/forums/pub...IR#>/bigok.gif