Sometimes rednecks can be OK!

 

The answer to any problem is Duct Tape and Zip Ties. So if anyone starts a question with "How do I ......." That's your answer. Workls like a charm and everyone will think that you are very helpful and full of good ideas.



I am being called a REDNECK from a guy from South Carolina?

 

speaking of redneck, sonce i did not like the end product of the battery tray modification, i scrapped it, and went for well, my own way. i used a LARGE stainless doo strike plate for a dead bolt that i had in the hardware box. i bought a rod/wing nut battery stabilizer kit and ran the strike plate under the battery cross member and put the 2 pieces of bent all-thread through the holes in the strike plate and strapped that civic battery down. it still wobbled toward the font though, so i took a flat piece of metal (like angle iron) and drilled a hole in each end and attached one end to the battery and the other through the 10mm bolt where the a/c receiver/dryer canister USED to reside. now that martha-focker won't budge......



hope that helped.....



i have a pic somewhere.....ill try to upload it...





louis

 

I'm not from SC... I just happen to live here.

 

you know how it is, once you have been somewhere for a while, it just kinda rubbs off





don't feel bad, i was born and raised in mississississippippi

 

I am not from Missouri either, I am a San Diego transplant but Missouri does seem to have one of the larger RX7 groups around. Odd I thought?

 

???

^^

 

What? rx7trix said he was not form SC, he just lives there so I was noting that I am not from MO, I just live here.

 

I couldn't get mine to squeeze past the side of the upright Fluidyne rad so I had to run the crossover pipe up and over the top of the Fluidyne and then down and across the face to meet the FMIC "IN" ...a real PITA !