I have a stock flywheel and clutch and after sliping it through 1-3rd gear druing hard driving i have a problem. When i go to disingauge the clutch there is a great vibration.. this is in all the gears...after talk to a few of my honda racing freinds then tell me its most mostly wormed or burn my flywheel. and told me to drive it like that and in time it will going away. Can this be the case?

 

Sounds like it needs to be resurfaced. Kinda like brakes and rotors. I just replaced mine when I did the clutch.

 

Hard to tell from your description, but if you have vibration while DISengaging the clutch, it would surprise me if it's your flywheel. I'm thinking a burnt surface or flaws on the flywheel would show up as vibration during engagement, especially from a stop.