3rd Generation Specific Talk about 3rd gen RX-7's here.

Fd Wont Start

Old Mar 20, 2003 | 11:03 PM
  #1  
Busted7's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2003
Posts: 14
Default

I have a 93 and it cranks but wont fire. Any ideas?

I figure its fuel or spark but dont know what to check.
Old Mar 21, 2003 | 12:37 AM
  #2  
papasmurf's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 588
From: the windy (cold ) city.
Default

spark if all it does is cranks but not fires, mine had the same problem a week ago, the assembly lube crapped up the plugs, i took them out and cleaned them and it fired right up. if there is no sputter or ANYTHING, it may be your fuel pump (happened in my stang 3 weeks ago) it turned out to be the switch to trun the pump on and off went bad. it kept cranking and cranking but nothing happened. if there is a sputter but the engine doesnt catch it will the spark
Old Mar 21, 2003 | 07:40 AM
  #3  
drew's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 1,278
From: Columbia, MD
Default

that's not alot of details, but there's a darned good chance that it may be flooded also... doesn't take much for that to happen
Old Mar 22, 2003 | 03:50 AM
  #4  
qwester007's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 563
From: Orlando, FL
Default

Check the plugs 1st
Old Mar 22, 2003 | 09:30 AM
  #5  
vosko's Avatar
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

if its not flooded it could be the ecu or igniter
Old Mar 22, 2003 | 09:44 AM
  #6  
rx7trix's Avatar
Senior Member
 
Joined: Oct 2002
Posts: 437
Default

Let us know..
Old Mar 22, 2003 | 02:41 PM
  #7  
rfreeman27's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 4,107
From: fredneck MD
Default

Mine flooded yesterday.



1) pull all plugs

2) Disable fuel pump (fuse in driver footwell)

3) crank untill all of the gas shoots out (may want to put a rag here and dont smoke while doing it )

4) Install plugs (prob should get some new ones, make sure you put the leading plug into the leading hole and trailing into trailing)

5) put pump fuse back in

5) crank and enjoy



*make sure your battery is good to crank for step 5, step 3 could have worn it down and you could just flood again if it doesent crank easy)

Mine shot a lot of white smoke, its just the gas burning up, nothing to worry about



this is what i did and it wrked really well, cranked on 1st try.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shieldsr3
2nd Generation Specific
5
Dec 3, 2002 10:20 PM
The Blue Bomber
2nd Generation Specific
19
Jul 17, 2002 04:00 PM
n2audio77
2nd Generation Specific
13
May 26, 2002 10:30 AM
n2audio77
2nd Generation Specific
4
May 1, 2002 10:24 AM
Squirrel
2nd Generation Specific
3
Oct 8, 2001 07:42 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:26 PM.