daver903

hey everyone.i searched to no avail...and the the one club rx-7 was no help.basically i need to find out what is the maxium low offset you can go on certain wheel sizes(without over fender). such as a 18x9.5 +16, will it fit with a roll and tiny pull? i heard FD's dont like to fit nothing crazy on the back....



just trying to get other peoples opinions. post pics of low offset wide wheels on the back if you care to.that would be great. ummm ya.



thanks.

amp

im runnin borbets in eighteen by nine with 275s... fits perfect and flush.. first pic

the other cym had enkeis in eighteen by 9.5 also with 275s.. second pic

dont recall exactly but the offsets on these were no lower than 40..

amp

rcerons fikses seventeen by ten...

treceb

but his offset is a lil low. depending on the wheel it might work.

Danno

I found this post in the Running Gear section. This have many wheel sizes that should help you alot.



Dan



Wheel Sizing Recommendations.

herblenny

I'll be running 18x10.5s all the way around (ssr comps)... rear will be stock 1/4 with slightly rolled fenders.. I know that fits since I had that set up 3 years ago.

daver903

cool well thanks for the hlep so far guys!!!

i was thiknin 235/40 on the a 18x9.5 +16. im just wondering if people have similiar crap,but doesnt sounds like it.

amp

235... im assumin this is a typo daver..

herblenny

+16 offset on 9.5 is too much.. It will extend out 53mm. You need to go with 40+ offset.

daver903

hahaha no typo sir. stretched tire.probly a 245 acaually 235 is to skinny.i have heard it all for lack of performance and crap.but im weird like that. i was told id need a slight roll and pull on the fender.i guess we will have to wait and see! this is like my dream wheel. is there much availability for overfenders?

a