To Do List
#1
ok now that i have my midpipe most likely i will be having boost creep.
i want to get started by porting the wastegate. how hard is it to take out the turbos???1 day job?2 day? and i have a dremel. will that work for porting the w/g with a carbide tip???if you have ported your w/g. gimmie all your info. thanks mucho
i want to get started by porting the wastegate. how hard is it to take out the turbos???1 day job?2 day? and i have a dremel. will that work for porting the w/g with a carbide tip???if you have ported your w/g. gimmie all your info. thanks mucho
#2
i would do the pipe and see if you creep before worring about it to much. I have a midpipe, and enlarged exhaust ports and I didnt bother with the wastegate. I use a turbosmart manual controller and I have never had any boost creep issues.
Thats not saying you won't. I am just saying wait and see.
Thats not saying you won't. I am just saying wait and see.
Thread
Thread Starter
Forum
Replies
Last Post
LUV94RX7
Insert BS here
0
07-26-2001 09:54 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)