try the noids, if they don't flash, just swap in the stock ecu, and see if they flash.
the commander should also say 13brew I believe, it's been awhile since I drove my car, but I know it makes reference to the fd specifically |
Originally Posted by boostdfd3s' date='Feb 24 2004, 08:42 PM
yeah hook up the noids and crank the car over. The wires may have no breaks in them, but if the ECU isnt making a circuit through them, theres your problem. *knock on wood*
|
Originally Posted by sidewinderx7' date='Feb 24 2004, 08:42 PM
unless you plug the noid lights in and crank it over, you wont know for sure. If they dont pulse you only have a few things that coule be at fault.
So youre getting continuous power to the injectors?! if you are SURE youre getting power to the injectors then its a ground problem. But without using those noids i dont know how else youre gonna test it by yourself. |
gimme a call after 230 and its a date! https://www.nopistons.com/forums/pub...DIR#>/beer.gif
|
Originally Posted by turbovr6' date='Feb 24 2004, 08:49 PM
try the noids, if they don't flash, just swap in the stock ecu, and see if they flash.
the commander should also say 13brew I believe, it's been awhile since I drove my car, but I know it makes reference to the fd specifically So if I get the lights, and there's no pulse (which I'm pretty sure there won't be) where should I go from there? Oh, I owe you guys all beer. https://www.nopistons.com/forums/pub...IR#>/smile.png |
sidewinder makes a good point. You can't be sure of anything yet really. Just becouse you have 12v+ with the key on, does not mean it has to be there while you crank it, a short, or bad connection somewhere could cause you to loose 12v when you crank. However that is a SLIM possibility..
Here is a question,,,, are you sure your injectors are the right ones? right resistance?? if they are wrong, then possibly putting the grounds together are correcting the resistance problem. Just a thought....... |
They are stock injectors.
|
Originally Posted by 9BASE3' date='Feb 24 2004, 09:52 PM
It does say 13BREW.. That I'm sure of.. I guess I never thought it could be the ECU.. As it was unopened.. Ever..
So if I get the lights, and there's no pulse (which I'm pretty sure there won't be) where should I go from there? Oh, I owe you guys all beer. https://www.nopistons.com/forums/pub...IR#>/smile.png with a meter go from the positve injector wire to ground, have someone crank the car and make sure you have 12v+ constant. if you do go from injector - to the battery positive, crank, and check for the meter to go from 12,0,12,0 if it does'nt, I'll say try the ecu swap, or consider my injector theory |
Originally Posted by turbovr6' date='Feb 24 2004, 08:53 PM
sidewinder makes a good point. You can't be sure of anything yet really. Just becouse you have 12v+ with the key on, does not mean it has to be there while you crank it, a short, or bad connection somewhere could cause you to loose 12v when you crank. However that is a SLIM possibility..
Here is a question,,,, are you sure your injectors are the right ones? right resistance?? if they are wrong, then possibly putting the grounds together are correcting the resistance problem. Just a thought....... I know the injectors are right.. They are clean stock 550's. https://www.nopistons.com/forums/pub..._DIR#>/sad.png |
Originally Posted by turbovr6' date='Feb 24 2004, 08:56 PM
if you get no puls with the noids, I would do this.
with a meter go from the positve injector wire to ground, have someone crank the car and make sure you have 12v+ constant. if you do go from injector - to the battery positive, crank, and check for the meter to go from 12,0,12,0 if it does'nt, I'll say try the ecu swap, or consider my injector theory |
All times are GMT -5. The time now is 07:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands