![]() |
alright the oil coolers on a fc are located in the front near the bumper. oil coolers on a fd?
|
I would find a set of used turbos instead of rebuilds. Most rebuilds don't seem to hold up very well. Definately go non sequential. Replace all water hoses/thermostat.
Don't worry about pullies or any of that dumb ****. Save for a computer. You will get alot more out of a computer then some $250 set of pullies. Just a pettit or M2 ecu would work fine and can be found for $250-500 used. Don't buy a SAFC. Its a waste of money. |
Originally Posted by 93 R1' date='Apr 23 2004, 12:38 PM
>I would find a set of used turbos instead of rebuilds.
>Don't worry about pullies or any of that dumb ****. Save for a computer. You will get alot more out of a computer then some $250 set of pullies. As for computer, Justin is right. Any computer is better than none, and worth the bucks in performance gains! My PMS box is everything I need for less than $500. |
oil cooler i know that one. woo hoo.....
its in front of the car. look in the opening under the drivers headlights. |
On both sides if it's an R1. https://www.nopistons.com/forums/pub...DIR#>/cool.png
|
Go ahead and replace the thermostat and Radiator cap when you replace the radiator. I would recomend replacing all the coolant hoses too.
|
All times are GMT -5. The time now is 08:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands