3rd Generation Specific Talk about 3rd gen RX-7's here.

Conversion?

Thread Tools
 
Search this Thread
 
Old 12-04-2006, 04:21 PM
  #1  
Junior Member
Thread Starter
 
go_sei's Avatar
 
Join Date: Dec 2006
Posts: 4
Default

Can Anyone tell me of a place or a site where I can find a conversion kit that lets me switch an automatic rx7 to a standard one?



o.o



any help on this will be greatly appreciated.
go_sei is offline  
Old 12-04-2006, 06:38 PM
  #2  
Senior Member
 
herblenny's Avatar
 
Join Date: Apr 2002
Location: Was: Cincinnati,OH.... NOW: Bham, AL
Posts: 632
Default

There isn't really a "kit" for it. You pretty much need all the manual stuff to convert.



I have a 5sp tranny if you need one
herblenny is offline  
Old 12-04-2006, 07:16 PM
  #3  
Senior Member
 
Sukai94's Avatar
 
Join Date: Sep 2006
Location: San Diego
Posts: 274
Default

From what i have heard it is pretty straight forward going from automatic to manual. It is going from manual to automatic that is a bit more difficult. Good luck with your conversation. Tell us how it goes!
Sukai94 is offline  
Old 12-04-2006, 09:23 PM
  #4  
Senior Member
 
jenkin's Avatar
 
Join Date: May 2005
Location: central WA state
Posts: 446
Default

you'd be money ahead to just sell your automatic and buy a 5 speed, unless you can do all the part sourcing and work yourself (and your question sort of leads me to believe that isn't an option).

and when you eventually sell your converted car, it will become an issue that buyers will use to drop the value of the car...

just my opinion.
jenkin is offline  
Old 12-04-2006, 10:26 PM
  #5  
Senior Member
 
Sukai94's Avatar
 
Join Date: Sep 2006
Location: San Diego
Posts: 274
Default

Originally Posted by jenkin' post='847950' date='Dec 4 2006, 07:23 PM

and when you eventually sell your converted car, it will become an issue that buyers will use to drop the value of the car...



just my opinion.


good point
Sukai94 is offline  
Old 12-05-2006, 05:58 AM
  #6  
Senior Member
 
herblenny's Avatar
 
Join Date: Apr 2002
Location: Was: Cincinnati,OH.... NOW: Bham, AL
Posts: 632
Default

I also agree with Jenkins.. I would never do a swap unless you absolutely wanting to do it so you want to learn... Its also pretty expensive job as you would need new harness, tranny, drive shaft, clutch, flywheel, starter, clutch slave cylinder, lines, pedals and all the hardwares, shifter, shifter ****, new shifter panel, new cluster(unless you like the auto cluster), take tranny cooler off, lines to the coolers, etc etc.. By the time you put time and money, it would of been cheaper for you to sell your auto cheap and pick up a manual FD...



When you go thru all that... its also probably a good time to upgrade everything.. probably easier to drop the engine and add all this before putting it back in.. But like Jenkin said, If you have to ask about a "kit", you probably wouldn't want to take on this task.
herblenny is offline  
Old 12-05-2006, 04:48 PM
  #7  
Junior Member
Thread Starter
 
go_sei's Avatar
 
Join Date: Dec 2006
Posts: 4
Default

Originally Posted by herblenny' post='847988' date='Dec 5 2006, 03:58 AM

I also agree with Jenkins.. I would never do a swap unless you absolutely wanting to do it so you want to learn... Its also pretty expensive job as you would need new harness, tranny, drive shaft, clutch, flywheel, starter, clutch slave cylinder, lines, pedals and all the hardwares, shifter, shifter ****, new shifter panel, new cluster(unless you like the auto cluster), take tranny cooler off, lines to the coolers, etc etc.. By the time you put time and money, it would of been cheaper for you to sell your auto cheap and pick up a manual FD...



When you go thru all that... its also probably a good time to upgrade everything.. probably easier to drop the engine and add all this before putting it back in.. But like Jenkin said, If you have to ask about a "kit", you probably wouldn't want to take on this task.




Ah. So the easiest way to do this is to just sell the auto...and go with a maunal. ^_^' i would do that...but hardly anyone on this island would want an auto..so i think im pretty much stuck with it.



but...isnt the possibility of a donor-car still available? would that make the dent in my wallet a little smaller?

o.o



just a question cause my friends continue to hassle me about a donor-car and i have yet to stumble across one. and i appreciate all the information that everyone has contributed.



now...does anyone know where i can find a manual rx7 1994 that still has everything in it?



and sorry for the stupid questions ive been asking. im still learning.
go_sei is offline  
Old 12-05-2006, 09:33 PM
  #8  
Senior Member
 
Sukai94's Avatar
 
Join Date: Sep 2006
Location: San Diego
Posts: 274
Default

Originally Posted by go_sei' post='848068
and sorry for the stupid questions ive been asking. im still learning.




There is no such thing as a stupid question.



I learned a lot in this thread. I have helped a friend go from auto to manual in a 5.0 mustang and it wasn’t too difficult. Guess it is different for the FD
Sukai94 is offline  
Old 12-05-2006, 09:37 PM
  #9  
Senior Member
 
Sukai94's Avatar
 
Join Date: Sep 2006
Location: San Diego
Posts: 274
Default

Depends on where you are located but i may be able help you out if you really want to go manual that badly
Sukai94 is offline  
Old 12-05-2006, 10:46 PM
  #10  
Junior Member
Thread Starter
 
go_sei's Avatar
 
Join Date: Dec 2006
Posts: 4
Default

Originally Posted by Sukai94' post='848115' date='Dec 5 2006, 07:37 PM

Depends on where you are located but i may be able help you out if you really want to go manual that badly


really!?!



im located in hawaii..to be a lil more accurate. kauai. Ive been dieing to switch my car to manual but i have very lil experience on something that hard-core.



go_sei is offline  


Quick Reply: Conversion?



All times are GMT -5. The time now is 01:10 AM.