3rd Generation Specific Talk about 3rd gen RX-7's here.

Car Acted Up Today And Was Revvin Wierd

Thread Tools
 
Search this Thread
 
Old 12-02-2002, 09:16 PM
  #1  
Senior Member
Thread Starter
 
94touring's Avatar
 
Join Date: Jul 2001
Location: Tulsa, OK
Posts: 3,346
Default

I'm not sure what caused it to do this but here is what happened. I was driving along about 50mph and I put it in neutral to cruise to a stop at a light, well instead of the revs going down to about 1k rpms, they jumped between 2k and 3k rpms and kept revvin up and down. Didn't matter if the clutch was all the way in or all the way out it would idle radically. If I put it in gear it and gave it zero throttle it would try to rev the motor. I pulled over and it kept doing it, cut the car off and back on and it still did it. Cut the car off again popped the hood and gave the throttle cable a few yanks and checked the dashpot screw, cranked it back up and it was fine. So what in the world caused it do idle like that?
94touring is offline  
Old 12-02-2002, 09:17 PM
  #2  
Senior Member
Thread Starter
 
94touring's Avatar
 
Join Date: Jul 2001
Location: Tulsa, OK
Posts: 3,346
Default

I just installed a new throttle cable not too long ago too if that matters.....
94touring is offline  
Old 12-02-2002, 09:20 PM
  #3  
Senior Member
 
pengaru's Avatar
 
Join Date: Apr 2002
Location: IL
Posts: 2,930
Default

sounds like vacuum and/or bacv issue, but i don't know jack about fd's.
pengaru is offline  
Old 12-02-2002, 09:22 PM
  #4  
Senior Member
Thread Starter
 
94touring's Avatar
 
Join Date: Jul 2001
Location: Tulsa, OK
Posts: 3,346
Default

What is a bacv?
94touring is offline  
Old 12-03-2002, 12:50 PM
  #5  
Senior Member
 
9BASE3's Avatar
 
Join Date: Feb 2002
Location: Frederick MD
Posts: 6,331
Default

Mine did that same ghey ****. I sprayed the throttle cable with cleaner, and yanked the **** out of it. Hasn't done it since.



9BASE3 is offline  
Old 12-03-2002, 01:12 PM
  #6  
Super Moderator
 
vosko's Avatar
 
Join Date: Jul 2001
Location: NJ
Posts: 17,839
Default

sounds like sticky throttle cable.... adjust tension i guess ?
vosko is offline  
Old 12-03-2002, 01:25 PM
  #7  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

the throttle cable should have some slack in it (1/4-1/2") they leave it loose to keep it from hanging the throttle open



mike
j9fd3s is offline  
Old 12-03-2002, 05:08 PM
  #8  
Senior Member
Thread Starter
 
94touring's Avatar
 
Join Date: Jul 2001
Location: Tulsa, OK
Posts: 3,346
Default

Well it worked fine today, i'm leaning toward what you guys are saying about the throttle cable. It stopped once I gave it a yank anyways.
94touring is offline  
Old 12-03-2002, 05:26 PM
  #9  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

yah, if its a little tight it might randomly idle wierd



mike
j9fd3s is offline  
Old 12-03-2002, 05:45 PM
  #10  
omghi2u
 
Turbo II's Avatar
 
Join Date: Mar 2002
Location: Los Angeles, CA
Posts: 7,259
Default

its jealous of the mini.
Turbo II is offline  


Quick Reply: Car Acted Up Today And Was Revvin Wierd



All times are GMT -5. The time now is 02:46 PM.