Bnr Stage 3
02-15-2003, 10:55 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Posts: 162
Today I dropped my car off with Gotham Racing to get The BNR stage 3s put in and to get my fuel rail machined for 850s on the injectors. Also a full silicone vacuum hose job, sparco hood pins, eibach pro springs, and the Greddy profec B boost controller. Ill be running non sequential on the BNRs. Should give me more edge than before.
02-16-2003, 10:07 AM
#3
Senior Member
Join Date: Sep 2002
Location: jackson, ms
Posts: 1,305
i was under the iimpressin that when brian upgrades them, that he remves the TCA door, and therefre they are all non sequential, or at least he recommends this procedure......and if the door is still intact on yours, you might want to make the decision b4 you put them on, because if you are going to run them in NS form, it would be a waste not to cut out the TCA door while you have the chance....
louis
louis
02-16-2003, 10:07 AM
#4
Senior Member
Join Date: Sep 2002
Location: jackson, ms
Posts: 1,305
i was under the iimpressin that when brian upgrades them, that he remves the TCA door, and therefre they are all non sequential, or at least he recommends this procedure......and if the door is still intact on yours, you might want to make the decision b4 you put them on, because if you are going to run them in NS form, it would be a waste not to cut out the TCA door while you have the chance....
louis
louis
02-24-2003, 09:13 PM
#10
Senior Member
Join Date: May 2002
Location: Richardson Texas
Posts: 4,326
well ben (viper1308) got shipped out to cali for a couple of weeks and then hes going to who knows where. i dont think he ever got his car back. that means its still at gotham with those stage 3s in there. man