3rd Generation Specific Talk about 3rd gen RX-7's here.

Blown Engine?

Old Mar 7, 2004 | 04:26 PM
  #1  
Stryk3r's Avatar
Thread Starter
Member
 
Joined: May 2003
Posts: 67
Angry

Hi guys what are the signs of a blown engine or a nearly blown engine..... i was told that with compression gone my car wont run but my car seems to run perfectly underboost...the problem is when it is idling the idle is very rough below 1500 so i have to keep it set at 1500 rpms...i do have a power fc installed in my car also so i am controlling the idle from there...the other problem is that my car wont start...it would start only once in 12 hours and during starting it takes a long time to start also....if i shut it down and try to start again it wont start...it would feel as if its about to start and then does down.....i can push the car and start it then it would start.....please guide me guys i am really worried.....
Old Mar 7, 2004 | 05:56 PM
  #2  
FD3S DRIFT's Avatar
Senior Member
 
Joined: Aug 2003
Posts: 570
From: St. Petersburg/Orlando, Fl
Default

check all you grounds, vacuum lines, spark plugs, wires, and everything else before you start worrying.
Old Mar 7, 2004 | 06:32 PM
  #3  
89 Rag's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 2,467
From: Portland, OR
Default

Tune up and a compression test
Old Mar 7, 2004 | 07:46 PM
  #4  
FikseRxSeven's Avatar
Senior Member
 
Joined: Jan 2003
Posts: 8,079
From: union, new jersey
Default

sounds like an ignition problem........ fix it before you really blow your engine up like me



check the wires, plugs, and even the coils.... also check all your ground wires.



did you do anything to your car before this happened? when was the last time you changed your plugs



good luck

martin
Old Mar 7, 2004 | 08:44 PM
  #5  
twinturborx7pete's Avatar
Senior Member
 
Joined: Dec 2001
Posts: 993
From: Panama City Beach, Florida
Default

Sounds like leaky injectors... you are probably running to rich at idle, hence the shitty idle. Leaky injectors will also flood your engine... pull them out, look for cracks on the pintle caps, and check all o-rings and insulators... and REPLACE THEM before you reinstall.



99% sure thats your problem.
Old Mar 7, 2004 | 11:34 PM
  #6  
Stryk3r's Avatar
Thread Starter
Member
 
Joined: May 2003
Posts: 67
Default

Thanks for your help guys....if my compression was low on 1 of the rotors would the car have trouble startig up.... the other thing is when i floor my car and my boost builds up the car seems to go fine but as soon as i let go of the race the car seems to start missing for a few seconds and then it gets back to the 1500 rpm and is stable there....
Old Mar 8, 2004 | 11:00 AM
  #7  
Fe3Boost's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 657
From: Alexandria Va
Default

Befores doing all this bullshit above do a compression test!!!!!!!!!!!!!!!!!!!!!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
-=RX-7 KID=-
Insert BS here
34
May 11, 2003 07:39 PM
BurnOrBeBurned
RX-7 & RX-8 For Sale
0
Apr 17, 2003 03:45 PM
Drifter93
3rd Generation Specific
13
Nov 13, 2002 06:58 AM
jspecracer7
Kills
12
Aug 21, 2002 08:31 AM
supraguy
RX-7 & RX-8 For Sale
0
May 14, 2002 08:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:15 AM.