jspecracer7

For the Aspec FD's you only need 3 BOP....AWS, EGR, ACV.

vosko

i shoulda got that kit i got spyfish's..... didn't have NO TEN PLATES....... lesson learned go K2RD

turbovr6

my kit came with all theese, allen head screws and gaskets for $55

Combo FD3S Block-Off Plate Kit:

13BREW ACV

13BREW Split Air

13BREW AWS Pipe

13BREW AWS Solenoid

13BREW ACV Pipe

13BREW EGR Valve

13BREW ISC/BAC Solenoid

13BREW Double Throttle

13BREW Oil Metering Pump

:bigthumg:

yayer

ok i'm another dumb one.. so when you block these off, do you leave them blocked off? or do you just block them off when you remove something and then take it off and replace that something.. i guess i'm confused as to what exactly you're doing when you block that stuff off

turbovr6

you block them off to remove the component from the car permanently.

vosko

goddamn i spent twice as much... oh well!!!

j9fd3s

i had k2rd make me block off plates and exhaust flanges for the 20b too.



mike

pengaru

I bought the mechanical OMP block off plate the other day, k2rd has cheap prices. I hope they are still making money.

yayer

and blocking these things off.. helps you in what way ? hp increase ?

pengaru

It depends on what you are blocking off, when you remove your ACV because you've added headers or removed your air pump (or both) you will need to install a block off plate to take it's place. It's simply a requirement otherwise you will have a big *** intake leak, and exhaust leak, on the side of the lower intake manifold. If your EGR is malfunctioning, or you want to remove it for a potential HP increase (debatable) or just want to preserve it for when you do have to smog the car, a block off plate will need to take it's place... once again, to prevent from having an exhaust leak on the top of the engine. With the metering oil pump block-off plate you would use it when you eliminate the metering oil pump, why one would want to remove it varies... in my case I'm switching to pre-mix because I don't want to inject oil from the sump and motor oil just causes carbon deposits anyways. Pre-mixing 2 stroke oil will lubricate better and burn cleaner. Blocking things off with blockoff plates is just a consequence of removing some sort of accessory, usually emissions related. Wether it results in an HP increase or not depends on what accessory you were eliminating when you needed to use the blockoff plate.