jack the front of the car up..

remove the wheels.. although not necessary

full turn of the wheel will suffice..

tools necessary.. 10mm wrench..socket..ratchet..extension and phillips head driver



a- disconnect negative

b- remove bolts from the bumper skin bracket

c- remove headlight cover and bezel

d- remove bolts from fender

e- remove screws and pushpins from wheel well....front area only

f- remove one 10mm bolt with door open for access

g and i - remove four 10mm bolts from underneath

h- 3 nuts need to be removed here.. two of which can be accessed inside the well

one of which requires pulling the bumper skin (this one is most likely caked with paint..



at this point you can pull the fender..