rmaiersg

My water pump has been leaking a while. Today I removed it and found that the water was leaking out of a hole in the side of the pump housing. Do I need a new one or can I fix this?



Thanks

RX7 13B 4 UR AZZ

clean up the hole and put some jb weld. You have to check to make sure it is not coming out of the pulley area check for play. and make or buy a gasket and you should be straight. But if you got the $$$ to put a new one put it on since it is out. Save you the headache latter on when the water starts coming out of the pulley

RX7 13B 4 UR AZZ

<<<< I LOVE THAT BANANA

rmaiersg

I'd rather do a quick fix right now. Money is kind of short right now. Thanks.

RX7 13B 4 UR AZZ

no problem glad to help. make sure you let the jb weld cure good before putting it back in

RX7 13B 4 UR AZZ

<<<<<<<<

Rob x-7

its leaking out of that hole because its shot, dont put JB weld on it,

put a new one on. You took it off, thats 1/2 the job there, just put

a new one on, they are cheap.

UniqueTII

Yeah, it's leaking because it's worn out. That's why the weep hole is there, because otherwise you wouldn't know it was worn until it failed completely.

j9fd3s

new pumps are like $40, even from mazda



mike

Geoffman72

Yes, with a rotary, do you really want to half *** the cooling system?