| 1Revvin7 |
01-30-2003 08:37 PM |
well, its so damn cold here too, but i managed to get out there tonight. I need some custom fuel rails, Need to tap my some sensors into my block, wire in my starter and fix my tranny mount, and fill my radiator. My dads going to order the right taps I need tommorrow, gonna call him to get some extra wire for the starter too.Everything but the fuel rails should be done this weekend. If Rotaryman buys my exhaust, I can payoff my buddy the $$ i owe him(hes hounding me!) and start saving for my rails. Then I will be rdy to tune, but its winter so she ain't leaving the garage. https://www.nopistons.com/forums/pub...O_DIR#>/11.gif I just threw some premix in the motor tonight, and tapped the water nipples on the block too; the ones that goto the TB, but the tb mod is done and its tapped and capped. Just need to buy some distilled water so i can fill the rad up, finally got all the right radiator hoses and heater core hose problem solved. I finally got around to drilling out the broken bolts on the tranny, and I had the "Y" section duped out of aluminum and i was gonna weld that to the tranny but i though naw. But after drilling the bolts out the holes won't exactly line up with the y section, so i have to bore the holes on the y section out and use some big washers on the bolts, then that BITCH will be done. https://www.nopistons.com/forums/pub...#>/biggrin.png
I just mainly need $$$, just blew couple hundred on new turbo gaskets and Royal purple syn premix/oil. |
