NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Tail lights (https://www.nopistons.com/2nd-generation-specific-17/tail-lights-1113/)

EAT1 01-08-2002 07:37 PM

Both of my tail lights are out. I've replaced the bulbs and checked the fuses; can't find any problem. Today, my "Stop" warning light went on... but as far as I can tell my brake lights are working; it's just the tail lights out. Anything I can do before I end up taking it to a mechanic? I don't need a ticket for something like this. ???

It's a 1986 GXL.

13BAce 01-08-2002 08:23 PM

It could have something to do with the headlight switch. Try checking it out.

EAT1 01-08-2002 10:34 PM

All I have is the owner's manual; no Chilton's, or anything. I have very little knowledge of electrical systems. Anything specific I should be checking out? :dontgetit:

13BAce 01-08-2002 10:41 PM


Originally Posted by EAT1' date='Jan. 08 2002,23:34
All I have is the owner's manual; no Chilton's, or anything. I have very little knowledge of electrical systems. Anything specific I should be checking out? :dontgetit:

Try checkinh out http://www.fc3s.org and http://www.iluvmyrx7.com for online factory manuals. Sometimes the switch can go bad. Many times the harness goes bad as well.

RisingSun 01-08-2002 10:44 PM

Same thing happened to me. It was a short in the headlight switch like 13B said. Take the switch out and see if there are burn marks on the harness going into it. I think there are websites that offer a repair service www.fc3s.org is one. Good luck.

EAT1 01-08-2002 10:56 PM

Thanks for the help. https://www.nopistons.com/forums/pub...#>/biggrin.png

13BAce 01-09-2002 11:17 AM


Originally Posted by RisingSun' date='Jan. 08 2002,23:44
Same thing happened to me. It was a short in the headlight switch like 13B said. Take the switch out and see if there are burn marks on the harness going into it. I think there are websites that offer a repair service www.fc3s.org is one. Good luck.

Mine had the same problem a little over 3 years ago. I just fixed a bad connector in my harness, and my switch has been fine. The only problem is that I have to fix it again every once in a while.

1Revvin7 01-10-2002 11:39 AM

I have had that **** go 3 times on my 7. Its the switch that hits the brake pedal. Disconnect it and unscrew it thats it like $10.


All times are GMT -5. The time now is 08:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands