Well now it can rev past 6k but only at like 1/4 throttle if i punch or 1/2 throttle it would stutter like hitting a fuel cut what could be the problem?

fuel pump ??, injectors ...



my 2cents

pull the codes out of the ecu



mike

There are no ecu codes.

so you tried it already?



mike

accel cable

Did you check the TPS yet?

would the tps have anything to do with it not revving high enogh, i thought that was just set for the idle

tune up- plugs,wires,coil packs

well I have new plugs and I have accell wires the 8mm. And I had my tps done anyway, along with the was pellet,

Not the settings....if a TPS is faulty, an engine won't rev.

So you don't have a tps??

I have a TPS but i had it check and alighed up at the shop. When he put the wax pellet in. Sorry for the wording. And he said my problem doesnt lie in the TB or TPS area.

I cant believe this is still happening. So what changed to get it to finally rev past 6k? Did it just start doing it on its own or did you adjust something?

well after I got my intake I just reved it in netral and i discroverd that in N it can rev past 6k it would just bounce there then punch through so i went ot the shop to show this ground breatking discovery and it didnt happen again, so one day i was just driving and i couldnt shift because i was drinking soda, and i looked at the tach it was at 7k, theni go ohh so i must have to give it a lil gas to do that and volla thats it so as long as I give it 1/4 throttle its all good. So now I am stumpped wondering how do I fix it.

so you checked all the following and they're fine?

-compression

-timing

-TPS

-spark/coils

-charging system

-ECU

do you still have the oil metering pump? (oil injection)



your 'fuel cut' sounds alot like what rmaiers S5 T2 did when he tried getting on it, he had the OMP disconnected. Reconnected it and the problem vanished. Verify that it is connected and working.

where is the OMP located?

Its located on the front cover, near the turbo. It has 4 oil lines on it. But if it was disc wouldn't it be in limp mode????

I dotn have a turbo well yet anyway, but Its connected.