Some questions for the rotor heads out there... I have a 86 NA At and want to swap to T2.... First is the diffs the same ie bolt in.... and the driveshaft? the T2 is stonger but shorter that a At one...... so can I get the J-spec 5 sp T2 driveshaft and diff......and of course the counterwieghts! and help is welcome!!!!! https://www.nopistons.com/forums/pub...1047683894.gif
|
its a bolt in procedure, you will need the driveshaft from a TII and a crossmember from a manual if im not mistaken,
|
You'll need the TII transmission, flywheel, clutch, starter, driveshaft, rear end, and axles. The last 3 are optional if you go with a custom driveshaft. Don't forget the slave and master cylinders, as well as the pedals. I don't think that the TII transmission and mount will bolt right in. I think that the mounting holes on A/T frame are in slightly different spots.
|
we miss Ace and his precision, hence the reason he is the 13b Ace!
|
Originally Posted by Rob x-7' date='Mar 14 2003, 05:56 PM
we miss Ace and his precision, hence the reason he is the 13b Ace!
|
Originally Posted by 13BAce' date='Mar 14 2003, 09:50 PM
I am the everything Ace!!! https://www.nopistons.com/forums/pub...#>/biggrin.png By the way, how do you like my new title?
|
Ace is the place for hardware https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
on the trans mount, will there be hole availible from factory?/ Aftermarket source? or( last option) is there a safe way to Fab? Once again thanks for all of everyones' help!!! BTW I also need the right counterwieghts right?
|
If I keep the at and use a TII rearend what drive shaft do I use?
|
a custom one
|
All times are GMT -5. The time now is 01:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands