Please help me ID this engine, sereise 4 or series 5? I wanna make sure i get a series 5 engine for my turbo two swap.



Any clues as to what year this engine is? Its a j-spec.



Sorry these are the onlypics the guy had:



http://ebay1.ipixmedia.com/abc/M28/_...2fba0b/i-2.JPG



http://ebay1.ipixmedia.com/abc/M28/_...2fba0b/i-1.JPG



Thanks



~Geoff

Looks like a Series 5 to me...

BTW...where you buyin that from? I don't trust Jspec motors anymore...but they are good if you are doing a conversion(as i did)..since it saves you time and effort locating every individual part...but seriously, that motor looks horrible...buy a jspec from somebody reputable...

Sorry for multiple posts..bored at work...but the reason I say it looks like a series 5 is due to the thermostat waterpump neck being plastic..s4s had metal and it's hard to tell, but the BOV adapter looks plastic too, another trait of a series 5 motor..and all jspec say "ROTARY TURBO" on the IC...aspec motors show "TURBO II" on the IC...

I have to agree with Rotaryman on this one. That engine looks bad...

How long has it been sitting and where? Those pullies look rusted! Does he have it outside?

Its tested and cleaned and all and comes with a warantee. But, i'm going to void it anywyas by putting on my front cover and oil pan so it fits my FB.



I'm going to be taking off all those pully's anyways. I'm going to be running a dual alt pulley. Removing everythign else (ac and power steer, air pump, and all that crap).



I'm doing a blowthrough carb setup on it.



And for a thousand dollars its a good deal. Also, I will be able to sell all the stuf i dont need to get some money back. In the end i think it will cost me about $600.

This aucton is for a Complete JDM 13BT Engine and 5spd Tranny.



All of our JDM Engines are compression and leak down tested to insure we only sell the highest quality engines. They are also cleaned before shipment.



The following is included in this auction:



13BT Engine

5spd tranny

Wiring Harness

Turbo

Turbo Manifold

Intake Manifold

Intercooler

Intercooler Piping

Starter

Alternator

Distributor

Motor Mounts

Shifter

Etc.

Payment can be made via money order, cashiers check, or direct deposit into our Bank Of America business account. All sales are final.



Shipping is done via truck freight and will be around $300 or less to anywhere in the US. Please email me for shipping quote only if you are seriously interested in purchasing this engine swap.



This auction is brought to you by TWV Trading. We are located in Sedro-Woolley, Wa. We specialize in importing only the highest of quality used Japanese performance engines and front clips for our customers.



Thanks for looking at our auction and Happy Bidding!!!

I havent checked lately, but Dave at fc3s.org sells Jspecs for $1K..thats who I originally got one from a while back, showed up very clean w/ a 30day warranty and was gauranteed to start....its a 50/50 chance on those jspecs, no matter what anybody says, you can never know the mileage.



Also, those pulleys rust really quickly, so it may have just sat for a week. Thats cool your putting it in an FB though...sounds like a good project, I want to put one in a Mazda B2200 pickup for shits and grins...



Well, have fun..let us know how it all works out..should be pretty damn fast!

My buddies and i estimate about 300hp to start off with, that should be fun for a while :-)



THe problem w/ buying from someone like fc3s or something, is i have to pay several hundred dollars shipping. I can't afford that right now. I'm looking northwest USA, somewher ei can drive to pick up.



IF i can't get it through tese guyss, then i'm going to get a shortblock s5 from corksport, however corksport gives LESS promises than these guys do on ebay.



Plus, the guys on e-bay are closer.





EDIT: Where the heck is the BOV on the tii engine?

EDITED EDIT: Your avatar roxxors, rotaryman

The BOV is mounted between the top of the turbo and before the IC...it's a little black valve venting back into the TID, and has a vacuum line coming off it. You can't really see it in the photos....

Yea...Lisa kaye is her name...met her at one of those Model things at the Import Showcase a few weeks back..she signed some posters and **** for our shop. She was pretty cool(lil rough w/ the english though...but who needs her to speak anyways.. https://www.nopistons.com/forums/pub...R ). I'm still infatuated w/ Cherie Roberts though...

Who, this?



And also, with the electric OMP on the series 5, is it possible to make it mechanical again by swaping the front cover? Would it be functional, or would i have to run premix anyways?



I'm doing a custom intake remember, so dont have to worry about that...



Thanks

~Geoff

Here's the best I could do right now to show the location of the BOV...

That girl is Cherie Roberts...she is the one I mentioned that I'm infatuated with https://www.nopistons.com/forums/pub...#>/biggrin.png https://www.nopistons.com/forums/pub...IR#>/boink.gif

Yea... i know.... thast why i posted the pic..... meaning "Who, you mean this?"

Ahh..I C



I've got that pic..I think I have them all, and all of Lisa Kaye, and all of a bunch of those import chicks...



It's funny, when I was in HS, a bunch of people made fun of me for being a "ricer" or a "tuner"...and they always thought I was into this lifestyle for the cars, HA..its all about the chicks https://www.nopistons.com/forums/pub...DIR#>/cool.png , ok maybe a little bit of its for the cars https://www.nopistons.com/forums/pub...#>/BURNOUT.gif

re-reading my post i came across as an *******. Sorry, i was meianging to be fecesious kinda, came out wrong.



anywyas, yeah. heheh, well, i've honestly NEVER got a chick because of my car.



Course, i never show my car off, and right now it doesnt even run, so, that could be part of it...



peace

~Geoff