NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Pics Of My Cosmo Motor (https://www.nopistons.com/2nd-generation-specific-17/pics-my-cosmo-motor-41451/)

4RotorRocket 12-13-2004 03:40 PM

nice wish it was mine

mazdadrifter 12-13-2004 04:12 PM

thanks for the compliments guys. The block was clean as hell to start with, but when I dropped it off to JR to have the exhaust ports cut, and such, he touched it up and put a nice clear coat on it. Turned out great.



J9 I know! That's what we were saying about the harness. Also the secondary injectors can be removed without taking off the uim. It's crazy.



Baldy, I've got my fingers crossed, but it should be on schedule to make it to the retreat. I don't know how well tuned it will be at that point so I might not beat it up just yet, but it will most likely be there.

Dysfnctnl85 12-13-2004 04:57 PM

Hmmm, we'll have to compare dyno sheets when all is said and done. I want to see how much of an effect the porting has on low-end...

teknics 12-13-2004 05:24 PM


Originally Posted by j9fd3s' date='Dec 13 2004, 04:06 PM
its stock, but the tb size and bolt pattern is different, AND the cosmo/fd tb is upsidedown from the t2 tb






im running an FD UIM....therefore could i use the cosmo TB and elbow piece?



kevin.

mazdadrifter 12-13-2004 05:52 PM


Originally Posted by Dysfnctnl85' date='Dec 13 2004, 05:56 PM
Hmmm, we'll have to compare dyno sheets when all is said and done. I want to see how much of an effect the porting has on low-end...




definatley! is yours 100% stock porting, including stock exhaust sleeves?? Jr and I were wondering just how much it would help if at all. Some of that stuff just makes you sleep better at night, but I figure it's a good investment considering if you rebuild the motor 100 times, the manifolds will always match up nice.

Dysfnctnl85 12-13-2004 06:02 PM


Originally Posted by mazdadrifter' date='Dec 13 2004, 06:52 PM
definatley! is yours 100% stock porting, including stock exhaust sleeves?? Jr and I were wondering just how much it would help if at all. Some of that stuff just makes you sleep better at night, but I figure it's a good investment considering if you rebuild the motor 100 times, the manifolds will always match up nice.




Yeah my baby's bone stock. Hopefully I'll get around to finishing it soon, haha.

CozmoRX7 12-14-2004 02:23 AM

wow! Looks really nice! I would love one of those.

-Matt

mazdadrifter 12-14-2004 07:13 PM

sat it in another fc today to get the motor mounts in the right spot. Jr had to cut half of that big elbow off and flip it over so the hood would close, lol.



It actually worked out great angle wise, I'll post a pic soon.

Ricer240sx 12-15-2004 12:07 PM

wow, i envy u!!!! u prolly saw my post already about when i got to ride in one, and yeah, a T66 pushing 8.5 psi on that motor is AWSOME!!!! i cant wait till summer when he turns up the boost to 25psi on Race gas!!!!!!! https://www.nopistons.com/forums/pub...IR#>/smile.png 3 rotors are the ****!!!

mazdadrifter 12-15-2004 06:11 PM


Originally Posted by Ricer240sx' date='Dec 15 2004, 01:06 PM
wow, i envy u!!!! u prolly saw my post already about when i got to ride in one, and yeah, a T66 pushing 8.5 psi on that motor is AWSOME!!!! i cant wait till summer when he turns up the boost to 25psi on Race gas!!!!!!! https://www.nopistons.com/forums/pub...IR#>/smile.png 3 rotors are the ****!!!




this motor is the little brother of the motor you speak of, it's the 2 rotor version of the 3 rotor you saw. Many have had great luck with getting huge hp out of it tho, so we'll have to see. I just want it to be reliable. The last version of my car never lost a race, so this is kindof overkill.


All times are GMT -5. The time now is 07:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands