|
Been working on the harness all day
|
Originally Posted by banzaitoyota' date='Jan 30 2005, 12:29 PM
so who's blowing your horn? |
huh?
|
Get back to work! |
How much tuning effect is that tube going to have with it being on the upstream of the throttle?
Doesn't the butterfly valve disrupt the pressure wave? |
Originally Posted by Travis R' date='Jan 31 2005, 11:56 AM
How much tuning effect is that tube going to have with it being on the upstream of the throttle?
Doesn't the butterfly valve disrupt the pressure wave? DYNO Testing and Tuning will tell. PLus: Dont get to attached to those butterflys! https://www.nopistons.com/forums/pub...>/rolleyes.gif Status: Pulled HALTECH harness from car. pulled unused harness branches back and tied for future use. Found a taped over unused ground in harness!!!!! GRRRR. Laid out some 14GA and 18GA leads in harness for future use. Incorporated stock Windhield wiper harness and Alt Harness into Haltech harness along with the mazda firewall grommet |
Is the p side motor mount done? If so you might consider adding some triangle peices to the sides.
Lookin good, should be a fun ride. GregW |
GMON. Still have some weldding to do on the mount. The casting outgassed really bad, so I need to grind and reweld.
The first pic today is part of the E6X harness. The harness is being secured with lacing and wrapped in BANZAI-WRAP. I had some sample gry that I am using under the dash. This harness incorporates: 1. Haltech, Unused branches are coiled neatly under the dash. 2. Wiper Harness 3. E2 Connector to Alt, maintains charging status on stock dash 4. Stock Water Temp Sensor [attachment=27784:attachment] This shot shows the unused branches and the BA-26 Plug to hook up Stock Coils and relay'ed power https://www.nopistons.com/forums/pub...IR#>/smile.png [attachment=27785:attachment] Here is a view of BANZAI-WRAP and a length of lacing cord [attachment=27786:attachment] A Close up of a Spot-Knot. [attachment=27787:attachment] |
Spool of Lacing Cord. Handy stuff https://www.nopistons.com/forums/pub...IR#>/smile.png
[attachment=27788:attachment] Messy Workbench [attachment=27789:attachment] Semi=Clean Workbench [attachment=27790:attachment] Final view of semi-wrapped harness with factory bulkhead gromme ready to be secured with BANZAI-WRAP to the harness [attachment=27791:attachment] |
who's kenneth howard! I'm gonna kick his ass!
nice bench btw, if i had my tools that organized i'd be afraid to use them and get them out of order |
| All times are GMT -5. The time now is 08:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands