Okay, new scenario, same problem. Just installed a 3rd Gen fuel pump into the car . I reconnected everything perfectly and now I have no spark to the plugs from the Leading Coils . I tested all 4 Spark plug wires with an inline light and the leading failed but the trailing coils lit up brightly . Any suggestions? Please help....need my TII back..

 

That sounds like just a bad coil. Check to see if the coil has power, and if its getting a signal from the ecu.

 

OK, new development, Coils have spark, Injectors NOT firing, Checked a selenoids and they are clicking on, at a total loss here...HELP!!!!

 

im guessing that you didnt install the pump correctly or blew the EGI fuse while you were installing

 

Fuel pumping, EGI fuse not blown....already checked

 

ECU Issues ???? ? ? ? ? ?? ? ??

 

make sure pump is wired right.... the pump cant be touching any metal

 

You mean as in the holder that it sits in, while in the tank? Ill double check that now and get back to you...

 

nope...that's not it, although the return line was touching the inside of the tank slightly, i bent it back to shape, re-installed it, but still nothing. Just to re-cap...I took car out last thursday night, ran perfect, parked it friday about 3 am, got up about 10 am and installed 3rd gen pump, wont' start, checked for spark to plugs, all good. Though I flooded it, removed plugs, cleaned, started car without plugs and cleaned out combustion chamber, reinstalled plugs...nothing. Re-installed stock fuel pump, reconnected everything reverse of removal, still got spark, and still nothing...AAAAAAHHHH!!!!! EGI fuse good, Main fuse good...is there a fuse I should check on the fuse box inside the car? Mine doesnt have a cover and I dont know as to what fuse is for what...



Thanks in advance...