I just bought a 2nd gen. RX-7, and has bigger turbo, big injectors, haltech. the guy i bought it off told me to put 1 oz. of oil in for every gallon, any one have any words on this? is it normal?



Thanks

You can pre-mix with 2-stroke oil. I believe this will cut down on Carbon build up a great bit in the engine. Did the guy have the Oil metering pump removed?

yeah make sure it's only 2 stroke. TC-W3 ashless too. you can't just throw in any oil and you don't have to add that much if you're not gonna race it or something. 2 gallons of gas to 1 OZ of oil is more than enough for DD.

Remember, if his car is '89 or older, haltech cant run the OMP.

what is TC-W3 ashless? just a type of oil? what is the OMP that haltech can't run?? and mine has sunroof and leather seats.

the OMP or MOP is the oil metering pump. it pumps engine oil into the engine to lube the insides and burns with the fuel.



lots of poeple remove it with heavy moded cars, or if you have an 89-91 with a haltech you have too unless you do lots of other work. so what you need to do is put 2 cycle oil into the gas tank at every fill up. so the fuel injectors will put oil into the engine, instead of the OMP. 1oz to 1 gallon is what people use.



I'd recommand the vavloline "multi purpose 2 cycle" it's low ash and tc-w3 approved.

tc-w3 is a certifacation. any brand that meets it will have a stamp or something on the bottle telling you.



many people say putting it into the gas tank is far better in terms of lubing. it's just a pain in the ass to some people to add it every tank.



failure to add the oil in will result in your engine toast in around 1000miles

Will the oil add miles to the life of the engine?? And what octane should i be running in my TII if i race occasionally??

you can add 2 cycle oil to your gas tank if you want to get some extra lubrication for the apex seals....

i work at Oilers Lube Express, (change oil on everything with a motor,lol) but my boss could order the **** for me for next to nothing with his vendors license i think?, im gonna start to do this to be a lil on the safe side, i mean think of those apex seals breaking!!!!!!not good,lol https://www.nopistons.com/forums/pub...IR#>/boink.gif

yeah it helps wear and tear on the apex seals and rotor housings