hi, i live in NJ, jsut bought my car last monday...i ahve a few problems with it, i think it needs a rebuild. the car starts up and runs fine when it is cold, but if i go out for like a 30 minute to hour drive...then leave it for an hour....its hard to start. does anyone know of a good shop in NJ...prferbly central jersey, I live in Green brook...right by rt 22, 287 and 78...thanks a lot

there are quite a few local places. hot start problem doesn't necessarily mean rebuild

thanks...maybe u could help me find a place...or hook me up with a number cause i'd like to get my car running some what normal because i love driving it. I was a die hard DSM and camaro fan before i test drove this car....but now...OMG i've been changed, but my car isn't normal :(

hey brand i have the same problem as u and my engine is new ok i am gonna show a trick when u are starting the engine and it doesn't start look for a little relay that is under the dash by the pedarsit loos like i little box very little like a remote control desconecte it and the gas pomp is gonna stop the try to turn on the car when is on the connect the relay back ok.

so after i disconnect this....try to start the car? or plug it back in then start the car?...also does the box say anthing on it so i don't unplug something important?...thanks a lot for the help

First of all, DO NOT go to Crystal Mazda for anything other than parts. I was very disappointed. Do not go to Maxon Mazda in Union (although they have an excellent rotary technician who has owned RX-7s and knows them well) - customer service in the service department (from management on down) is horrible. And do NOT go to the Mazda dealer in Maplewood. I have had very good luck with Sansone Mazda in Avanel. However, there just isn't much around here. I would very much recommend you go to KDRotary for significant issues - not in New Jersey, in Nazareth, PA, but they are, in the opinions of many, the best rotary shop in the east.

jr's rotary performance in NJ is the best i have dealt with and i have used KDR and other shops

I haven't been to JR's - I may have to try them out . . .

let me put it this way. i spent about $800 @ kdr to fix my 89 GTU.... and it still didn't run correctly. 6 ports not working, won't idle correctly. $20 and 20 mins at JR's car had NEVER ran as good. he has worked on my FD, old GTU and old T2... simply put he is the man. the most honest and best rotary mechanic and i have ever dealt with. there is nobody else i feel more comfortable leaving the car with. i have atleast talked to just about rotary mechanic in the tristate... anyway enough about him https://www.nopistons.com/forums/pub...IR#>/smile.png



i have his # and all that if anyone wants