|
You may want totry Grips56 idea. Also check to see if you have any leaks in the clutch hydrualic system. This may also be contributing to your problem.
|
do you have any loose in fork when the clutch pedal is release ?
|
the clutch disc and pp are bolted to the flywheel--seems like there is a lot of pressure. the hydro system was fine(brand new everything). with the trans down the fork has play when no pressure from the slave is applied. doesnt seem like i changed anything, but im going to put the trans back up after work. i need vosko's help, cause the owner weighs less than the trans! i'll let you know how it goes...
|
tie a rope to your e-brake handle and put the rope down the hole where the shift rod is, lift the rear of the tranny up as far as you can and tie it down, then all you have to lift is the front of the tranny up and slide it on in,use some grease too but dont get any on the clutch set!, hope this helps ya a lil bit? piece
use a jack to lift the front of the tranny if its still to heavy, later |
carluch240 came up with a great idea today after put the tranny up again "why don't we take off the clutch slave and spin the flywheel and see if it moves....."
we did that guess what it moves. apparently mazda sent the wrong clutch slave!!!!!! we were going crazy and finally carluch figured out a 10 second way to test it...... the 89 TII with the clutch job from hell will be fixed soon. the old clutch slave was bad anyway. it was rusting internally and falling apart.... woohooo. soo happy!!!! |
damn thats crazy. Doesn't that piss ya off?
|
i talked to turborotor. apparently got a N/A slave...... it sucks we took it all apart again but hey atleast we know how to fix it!!..... now to fix the 90 GXL i put a reman into. has a vacuum leak. gotta be on the LIM to block.... gotta tear that apart too! :(
|
Originally Posted by vosko' date='Oct 13 2002, 09:42 PM
i talked to turborotor. apparently got a N/A slave...... it sucks we took it all apart again but hey atleast we know how to fix it!!..... now to fix the 90 GXL i put a reman into. has a vacuum leak. gotta be on the LIM to block.... gotta tear that apart too! :(
|
Originally Posted by 1Revvin7' date='Oct 13 2002, 09:53 PM
[quote name='vosko' date='Oct 13 2002, 09:42 PM']i talked to turborotor. apparently got a N/A slave...... it sucks we took it all apart again but hey atleast we know how to fix it!!..... now to fix the 90 GXL i put a reman into. has a vacuum leak. gotta be on the LIM to block.... gotta tear that apart too! :(
oh well live and learn.... https://www.nopistons.com/forums/pub... |
that would suck. https://www.nopistons.com/forums/pub...IR#>/boink.gif
|
| All times are GMT -5. The time now is 05:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands