NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   N/a Turbo Kit (https://www.nopistons.com/2nd-generation-specific-17/n-turbo-kit-12949/)

InfamousReX 02-26-2003 03:55 PM

i have a 87 gxl and i was wondering if anybody would have or if anyone knew anyone that had a turbo kit for my car....please email me if you do.... nonstopwordplay@aol.com......

cymfc3s 02-26-2003 04:19 PM

the kit is complete, with engine, tranny, drivetrain, body and interior. Turn key! And its only 2-3k. They sell them on www.autotrader.com and www.ebay.com.

Seppuku 02-26-2003 04:23 PM


Originally Posted by cymfc3s' date='Feb 26 2003, 05:19 PM
the kit is complete, with engine, tranny, drivetrain, body and interior. Turn key! And its only 2-3k. They sell them on www.autotrader.com and www.ebay.com.

hahaha https://www.nopistons.com/forums/pub...#>/biggrin.png

InfamousReX 02-26-2003 04:26 PM

turbo 2's in my area 2-3k....ha...if you find one that cheap let me know.....

cymfc3s 02-26-2003 05:17 PM


Originally Posted by InfamousReX' date='Feb 26 2003, 02:26 PM
turbo 2's in my area 2-3k....ha...if you find one that cheap let me know.....

where do you live? theres a few on ebay. And 3 or 4 in the bay area for sale.

InfamousReX 02-26-2003 07:20 PM

i'm in miami fl....i been looking for t2's.....i found 2 and each were going for about 5k

1Revvin7 02-26-2003 07:22 PM

they don't make turbo kits, you have to drop a turbo motor/drivetrain/computer wiring/senors etc into your gxl.

ROTARYROCKET7 02-27-2003 04:06 PM

i have a gxl and am looking for a turbo to put on mah whip. better to just by a t2

1Revvin7 02-27-2003 04:29 PM


Originally Posted by ROTARYROCKET7' date='Feb 27 2003, 05:06 PM
i have a gxl and am looking for a turbo to put on mah whip. better to just by a t2

yeah those are rare though in some areas, but that would be the best route, some of us just take the hard route https://www.nopistons.com/forums/pub...DIR#>/wink.png

JLB 02-27-2003 09:23 PM

1 Attachment(s)
If you do convert it, do it right! I figured I could get away without changing any of the driveline, and built the manifold you see in the avatar to use a stock S5 turbo on my '91 NA. In very little time I had a clutch that slipped bad when still cold under boost, destroyed a tranny, cracked a diff in two, and finally popped a water seal since the compression was too high. Here is a pic of the diff to ponder...



Jason


All times are GMT -5. The time now is 10:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands