my nephews Turbo II. 8lbs of boost.
10-22-2010, 07:26 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
my nephew Raz and I just spent the last 3 weeks working on his turbo II. here we just finish street tuning his haltech @ 8psi of boost. car pulls strong all through the rpms. we are getting this car ready for Maryland and the import vs domestic event. car will be raced @ 22psi of boost at the event. enjoy the video..
mods are:
series 4 engine
streetport with all new seals clearanced to tight specs.
haltech F10
2 1000cc primaries and 1600cc secondarys
2 msd6al with 2 steps
act clutch kit
bosch in-tank fuel pump
aeromotive fpr
front mount intercooler.
http://www.youtube.com/watch?v=Ez3HvxXyKGM
mods are:
series 4 engine
streetport with all new seals clearanced to tight specs.
haltech F10
2 1000cc primaries and 1600cc secondarys
2 msd6al with 2 steps
act clutch kit
bosch in-tank fuel pump
aeromotive fpr
front mount intercooler.
http://www.youtube.com/watch?v=Ez3HvxXyKGM
10-24-2010, 07:38 PM
#3
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
03-26-2011, 03:56 PM
#5
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
took my nephews car to the dyno. made 400rwhp @ 15lbs of boost. I tried to dial the boost at 22 psi but the car would not hold the boost. leaking boost everywhere. we will fix the boost leaks and return to the dyno. turbo is a 61 mm compressor wheel.
03-27-2011, 08:42 AM
#8
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
James, Im thinking 22 psi of boost will put this turbo engine at or around 515rwhp. tune has alot more in it. this 400rwhp was tuned on a super safe air fuel ratio. hence lowering hp numbers and still manage a decent hp. basically the car has tons of potential.
