2nd Generation Specific 1986-1992 Discussion

misfire questions!

Thread Tools
 
Search this Thread
 
Old Jul 14, 2013 | 03:01 AM
  #1  
88gxl's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2013
Posts: 6
Default misfire questions!

so I replaced my spark plugs and still misfires any tips or suggestions? I just want it to run how it should:/
Old Jul 14, 2013 | 09:45 PM
  #2  
ghost1000's Avatar
Member
 
Joined: Dec 2012
Posts: 41
From: Delaware
Default Re: misfire questions!

I need more info on the missfire

How rough does it run?
Is it better hot or warm?
How do your plug wires look?
Does it run better at idle or reved up?

I would test the leading coil first because that would be easy. Sorry I don't know the values of the top of my head.
If its worse at idle spray wd40 around the intake and places where it might vacuum leak.
I also highly recomend a compression test.

I saw a video on youtube today type "rx7 turbo ll track test" posted by "lovemyrx7se"

Last edited by ghost1000; Jul 14, 2013 at 09:49 PM.
Old Jul 16, 2013 | 08:11 AM
  #3  
88gxl's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2013
Posts: 6
Default Re: misfire questions!

It does not stay running unless warmed up its backfires when revs go down I've made sure every plug And wire are correct.
Old Jul 16, 2013 | 01:07 PM
  #4  
Baldy's Avatar
Super Moderator
 
Joined: Sep 2002
Posts: 5,425
From: Tallahassee, FL
Default Re: misfire questions!

Backfiring like how? A few pops can be normal, lots of unburnt fuel in the exhaust when you let off from high rev.

Not idling is likely a throttle body/TPS adjustment issue.
Old Jul 16, 2013 | 06:49 PM
  #5  
ghost1000's Avatar
Member
 
Joined: Dec 2012
Posts: 41
From: Delaware
Default Re: misfire questions!

Any luck? If ur stuck PM me ur number. I need to hear the car and talk to you. There are so many thing it could be.

When did the problem start? Was there work being done to the car?
Check the wiring to your major sensors

Map
Maf
TPS
02
Water temp

Unplug ur trailing coil and try to start it.
If it doesn't start at all could be a problem with ur leading coil
Old Jul 22, 2013 | 07:26 PM
  #6  
88gxl's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2013
Posts: 6
Default Re: misfire questions!

fixed it today set my tps to 1k no more misfire but idles all over up to 1k and bounces around from 6 to 1 so iam guessing idle screw?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RobertWhite
2nd Generation Specific
2
May 19, 2011 03:12 PM
cypher02xd
2nd Generation Specific
0
Sep 16, 2007 12:36 AM
Barry Bordes
Single Turbo Discussion
5
Jun 9, 2005 07:59 PM
Fingers
2nd Generation Specific
11
Aug 3, 2003 12:02 PM
Fingers
2nd Generation Specific
2
Jul 21, 2003 02:18 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:29 AM.