jus plain need help
03-13-2007, 08:45 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2005
Location: columbus ohio
Posts: 285
as some of u might remember i bought a 10ae a few months back and it didnt have any, i mean ANY wiring in it. no dash harness, no ecu harness, everything not there and unplugged. i have bought all 3 harness and have plugged everything under the dash but under the hood, i only have about 1/2 the plugs in, i cant find where alot of them go and i didnt get anything under the hood, so im not to sure what important stuff i might be missing so someone jus give me some over all help on this problem and how to get thru it as me and my buddy have never had to completely rewire a car before.
problem 2, i have a japanese ecu harness that came with the motor, so i have 2 harness' trying to go thru the driver side gromit, whats the best way around this, drill a whole thru the firewall to run the other ecu harness thru, because it wont reach to the passegner side gromit.
someone please help me out as we are stuck and not making so much progress
problem 2, i have a japanese ecu harness that came with the motor, so i have 2 harness' trying to go thru the driver side gromit, whats the best way around this, drill a whole thru the firewall to run the other ecu harness thru, because it wont reach to the passegner side gromit.
someone please help me out as we are stuck and not making so much progress
03-13-2007, 11:59 PM
#2
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
1. pics would help. the main harness does a lot of stuff, and it clips into the alternator harness under the brake master too, so theres a lot of connectors on the left side
2. um i think you just need to find a us harness, the ecu plugs into the dash harness, so that one wont reach...
2. um i think you just need to find a us harness, the ecu plugs into the dash harness, so that one wont reach...
03-14-2007, 01:20 PM
#3
Senior Member
Thread Starter
Join Date: Nov 2005
Location: columbus ohio
Posts: 285
hahaha for some reason i knew you would be the one to answer, u seem to be the wiring expert, im going out to work on it (at a friends garage) as soon as my buddy gets here so ill take plenty of pics and thanks for any and all help
03-14-2007, 02:50 PM
#4
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by jdm12a' post='863507' date='Mar 14 2007, 11:20 AM
hahaha for some reason i knew you would be the one to answer, u seem to be the wiring expert, im going out to work on it (at a friends garage) as soon as my buddy gets here so ill take plenty of pics and thanks for any and all help
been there done that! but i need to see it
03-15-2007, 10:55 AM
#6
Senior Member
Thread Starter
Join Date: Nov 2005
Location: columbus ohio
Posts: 285
i tok the pics on a friends cable wich takes a diff usb, like the size of a pin that i dont have, but ill get it and post tonight or tomoro, meanwhile, do u happen to know of any diagrams that show where the wiring goes?
03-15-2007, 11:34 AM
#7
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by teknics' post='863548' date='Mar 14 2007, 04:01 PM
j9 can you list what all the plugs are under the master? i have tons unplugged and i cant remember what theyre for lol.
kevin.
theres like 4-6 plugs down there, i'm not sure off the top whats there, starter wire, maybe the alternator wires, reverse lights? neutral switch? oil level sensor?
03-15-2007, 02:18 PM
#8
Senior Member
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
Originally Posted by j9fd3s' post='863648' date='Mar 15 2007, 12:34 PM
theres like 4-6 plugs down there, i'm not sure off the top whats there, starter wire, maybe the alternator wires, reverse lights? neutral switch? oil level sensor?
na like directly under the master cylinder. i have all those other ones plugged in to there appropriate places, i think a couple are for the stock coils, i know one is for the brake fluid level sensor etc
kevin.
kevin.
03-15-2007, 05:18 PM
#10
Senior Member
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
Originally Posted by j9fd3s' post='863685' date='Mar 15 2007, 04:17 PM
yeah, all the plugs are different, so you cant get it wrong, its more like if you dont have all the stock bits anymore
mike
mike
mike.mike.
there seems to be two plugs the brake fluid level sensor could plug into..only confusing bit.
kevin.kevin.