2nd Generation Specific 1986-1992 Discussion

Injectors

Thread Tools
 
Search this Thread
 
Old 03-10-2004, 06:49 PM
  #1  
Senior Member
Thread Starter
 
cps87rx7se's Avatar
 
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
Default

I was wondering how big the injectors on my 87 N/A are? I would like to get bigger ones if possible, but wondering what you guys think. The mods that I have done are a full custom intake arm that I made and welded, ported throttle body with throttle body mod, racing beat header, carsound high flow cat, and a Borla cat back exhaust. Any info is appreciated.
cps87rx7se is offline  
Old 03-10-2004, 06:51 PM
  #2  
Senior Member
 
1Revvin7's Avatar
 
Join Date: Oct 2001
Location: Peoria, AZ
Posts: 10,906
Default

You don't need it. You are no where near maxxing out the stock 4x 460cc.
1Revvin7 is offline  
Old 03-10-2004, 06:55 PM
  #3  
Senior Member
 
rx7_re's Avatar
 
Join Date: Jun 2003
Location: Chicago
Posts: 226
Default

If anything you should get an apexi SAFC and lean it out some.
rx7_re is offline  
Old 03-10-2004, 07:06 PM
  #4  
Senior Member
Thread Starter
 
cps87rx7se's Avatar
 
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
Default

What does the Apex'i SAFC or the HKS Super AFC do? How would I tune this? And how would this be good for my car? Sorry for asking dumb questions, but I have no clue on what to do when it comes to this part of upgrading.
cps87rx7se is offline  
Old 03-10-2004, 07:09 PM
  #5  
Senior Member
 
rx7_re's Avatar
 
Join Date: Jun 2003
Location: Chicago
Posts: 226
Default

I am pretty sure the AFC stands for AIR Fuel Controller. Basically leats you tune the fuel settings to a certain limit. Meaning if you have acces to a dyno you get a SAFC and go to the dyno. Start by leaning it out a litlle at a time until the pwer stops increasing. Seeing as you have a NA you are more than likely running rich, so leaning it out some are will gain you some horsepower
rx7_re is offline  
Old 03-10-2004, 08:42 PM
  #6  
Senior Member
Thread Starter
 
cps87rx7se's Avatar
 
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
Default

That sounds great, but the only shitty part is that I am in upstate new york, and there are really no dynos up here that I know about.
cps87rx7se is offline  
Old 03-10-2004, 08:56 PM
  #7  
Senior Member
 
rx7_re's Avatar
 
Join Date: Jun 2003
Location: Chicago
Posts: 226
Default

meh, you should be able just by the feel. You really don't have to dyno I doubt many peaple do, it just helps you get the most out of it.
rx7_re is offline  
Old 03-11-2004, 10:18 AM
  #8  
Senior Member
Thread Starter
 
cps87rx7se's Avatar
 
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
Default

Can you tune the Super AFC from the car from the controller? I am not that experienced with it, how hard do you think that it would be? And would it be easy to tell when it has reached its max output with out leaning it out as much as to blow up the engine?
cps87rx7se is offline  
Old 03-11-2004, 11:48 AM
  #9  
Senior Member
 
roadkill669's Avatar
 
Join Date: Jun 2003
Location: Culpeper, VA
Posts: 572
Default

SAFC means Super Air Flow Converter. It alters your air flow meters signal to the ECU. It either makes the ECU think there is more or less air inturn giving the motor more or less fuel. It does help alot. Its no standalone, but it does what it was meant to.



The thing is a little 5x2x1 box that you monut in your car. It is the controller and the handset all in one. You just scroll through the points and raise or lower the percentage of correction. As long as you have a AFR gauage, you can tune it really easily.



To tel if you are too rich, your car will blow black smoke. If your too lean, your car will feel like its running like crap.



You wont be able to max out the injectors with the SAFC. I beleive they can only add a correction of 10% or 20% duty cycle. Your car should only be running 55 I think.



If you want to spend a few hundred more, I reccomend the Greddy eManage. It is one hell of a piggyback that does ignition, fuel, datalogging, everything a standalone can do, it can pretty much do. If my ECU didnt fry, I wouldve gone that route, but I didnt.



I think thats about it.
roadkill669 is offline  
Old 03-11-2004, 11:50 AM
  #10  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

all the stock ecu's run in the 85+% duty cycle range at w.o.t. and high rpms.
j9fd3s is offline  


Quick Reply: Injectors



All times are GMT -5. The time now is 05:41 PM.