|
ok i got the car to idle at 750rpm when warmed up. it doesn't want to idle when cold just stalls. it also won't idle when rpms are coming down stalls. i get some nice hesitation and bucking at part throttle also. i don't have to adjust a 89-91 TPS right ? at WOT its smoother than silk. i'm pretty sure the timing is set correctly now. doesn't look like i have anymore vacuum leaks. could this be caused by my fuel tank gasket not sealing 100%. i'm either getting a spare fuel tank or a fuel cell... deciding soon. i just want this to run like it used to https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Originally Posted by vosko' date='Jul 3 2002, 10:43 PM
ok i got the car to idle at 750rpm when warmed up. it doesn't want to idle when cold just stalls. it also won't idle when rpms are coming down stalls. i get some nice hesitation and bucking at part throttle also. i don't have to adjust a 89-91 TPS right ? at WOT its smoother than silk. i'm pretty sure the timing is set correctly now. doesn't look like i have anymore vacuum leaks. could this be caused by my fuel tank gasket not sealing 100%. i'm either getting a spare fuel tank or a fuel cell... deciding soon. i just want this to run like it used to https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Originally Posted by 13BAce' date='Jul 3 2002, 09:08 PM
[quote name='vosko' date='Jul 3 2002, 10:43 PM']ok i got the car to idle at 750rpm when warmed up. it doesn't want to idle when cold just stalls. it also won't idle when rpms are coming down stalls. i get some nice hesitation and bucking at part throttle also. i don't have to adjust a 89-91 TPS right ? at WOT its smoother than silk. i'm pretty sure the timing is set correctly now. doesn't look like i have anymore vacuum leaks. could this be caused by my fuel tank gasket not sealing 100%. i'm either getting a spare fuel tank or a fuel cell... deciding soon. i just want this to run like it used to https://www.nopistons.com/forums/pub...IR#>/smile.png
nope. which one is narrow range ? |
Originally Posted by vosko' date='Jul 4 2002, 03:24 AM
[quote name='13BAce' date='Jul 3 2002, 09:08 PM'][quote name='vosko' date='Jul 3 2002, 10:43 PM']ok i got the car to idle at 750rpm when warmed up. it doesn't want to idle when cold just stalls. it also won't idle when rpms are coming down stalls. i get some nice hesitation and bucking at part throttle also. i don't have to adjust a 89-91 TPS right ? at WOT its smoother than silk. i'm pretty sure the timing is set correctly now. doesn't look like i have anymore vacuum leaks. could this be caused by my fuel tank gasket not sealing 100%. i'm either getting a spare fuel tank or a fuel cell... deciding soon. i just want this to run like it used to https://www.nopistons.com/forums/pub...IR#>/smile.png
nope. which one is narrow range ?[/quote] I forget the color of the plug, but it will be the one that the TB stops pushing on first. |
Originally Posted by 13BAce' date='Jul 4 2002, 10:15 AM
[quote name='vosko' date='Jul 4 2002, 03:24 AM'][quote name='13BAce' date='Jul 3 2002, 09:08 PM'][quote name='vosko' date='Jul 3 2002, 10:43 PM']ok i got the car to idle at 750rpm when warmed up. it doesn't want to idle when cold just stalls. it also won't idle when rpms are coming down stalls. i get some nice hesitation and bucking at part throttle also. i don't have to adjust a 89-91 TPS right ? at WOT its smoother than silk. i'm pretty sure the timing is set correctly now. doesn't look like i have anymore vacuum leaks. could this be caused by my fuel tank gasket not sealing 100%. i'm either getting a spare fuel tank or a fuel cell... deciding soon. i just want this to run like it used to https://www.nopistons.com/forums/pub...IR#>/smile.png
nope. which one is narrow range ?[/quote] I forget the color of the plug, but it will be the one that the TB stops pushing on first.[/quote] ok. i'll check it after work. i think my partial throttle hesitation might be from the gas tank issue i'm having. i emailed somebody to see if they have a tank. i have to ask ito also. if my FD won't be ready for this weekend i want to bring my TII https://www.nopistons.com/forums/pub...IR#>/smile.png |
Originally Posted by vosko' date='Jul 4 2002, 12:23 PM
[quote name='13BAce' date='Jul 4 2002, 10:15 AM'][quote name='vosko' date='Jul 4 2002, 03:24 AM'][quote name='13BAce' date='Jul 3 2002, 09:08 PM'][quote name='vosko' date='Jul 3 2002, 10:43 PM']ok i got the car to idle at 750rpm when warmed up. it doesn't want to idle when cold just stalls. it also won't idle when rpms are coming down stalls. i get some nice hesitation and bucking at part throttle also. i don't have to adjust a 89-91 TPS right ? at WOT its smoother than silk. i'm pretty sure the timing is set correctly now. doesn't look like i have anymore vacuum leaks. could this be caused by my fuel tank gasket not sealing 100%. i'm either getting a spare fuel tank or a fuel cell... deciding soon. i just want this to run like it used to https://www.nopistons.com/forums/pub...IR#>/smile.png
nope. which one is narrow range ?[/quote] I forget the color of the plug, but it will be the one that the TB stops pushing on first.[/quote] ok. i'll check it after work. i think my partial throttle hesitation might be from the gas tank issue i'm having. i emailed somebody to see if they have a tank. i have to ask ito also. if my FD won't be ready for this weekend i want to bring my TII https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote] How's the air flow meter? |
AFM is fine. its the one from the old engine. before the car broke it was idling perfect and running great
|
Originally Posted by vosko' date='Jul 4 2002, 01:52 PM
AFM is fine. its the one from the old engine. before the car broke it was idling perfect and running great
|
i have the custom ito spec TID remember. there was only one unused hole which we capped off from the stock BOV. i'm gonna spray some carb cleaner around the engine and see if i can find some vacuum leaks
|
Originally Posted by vosko' date='Jul 4 2002, 04:02 PM
i have the custom ito spec TID remember. there was only one unused hole which we capped off from the stock BOV. i'm gonna spray some carb cleaner around the engine and see if i can find some vacuum leaks
|
Originally Posted by 13BAce' date='Jul 4 2002, 02:39 PM
[quote name='vosko' date='Jul 4 2002, 04:02 PM']i have the custom ito spec TID remember. there was only one unused hole which we capped off from the stock BOV. i'm gonna spray some carb cleaner around the engine and see if i can find some vacuum leaks
mike is gonna come over and help out..... you have any tips for doing the timing ? we aligned the timing to the first yellow mark on L 1 |
Originally Posted by vosko' date='Jul 4 2002, 06:53 PM
[quote name='13BAce' date='Jul 4 2002, 02:39 PM'][quote name='vosko' date='Jul 4 2002, 04:02 PM']i have the custom ito spec TID remember. there was only one unused hole which we capped off from the stock BOV. i'm gonna spray some carb cleaner around the engine and see if i can find some vacuum leaks
mike is gonna come over and help out..... you have any tips for doing the timing ? we aligned the timing to the first yellow mark on L 1[/quote] Just do it like the factory manual says to do it. Did you use a timing light? |
Originally Posted by 13BAce' date='Jul 4 2002, 05:41 PM
[quote name='vosko' date='Jul 4 2002, 06:53 PM'][quote name='13BAce' date='Jul 4 2002, 02:39 PM'][quote name='vosko' date='Jul 4 2002, 04:02 PM']i have the custom ito spec TID remember. there was only one unused hole which we capped off from the stock BOV. i'm gonna spray some carb cleaner around the engine and see if i can find some vacuum leaks
mike is gonna come over and help out..... you have any tips for doing the timing ? we aligned the timing to the first yellow mark on L 1[/quote] Just do it like the factory manual says to do it. Did you use a timing light?[/quote] we used a timing light. i have to print it out from the factory service manual. i have a feeling the TPS is bad |
Originally Posted by vosko' date='Jul 4 2002, 08:10 PM
[quote name='13BAce' date='Jul 4 2002, 05:41 PM'][quote name='vosko' date='Jul 4 2002, 06:53 PM'][quote name='13BAce' date='Jul 4 2002, 02:39 PM'][quote name='vosko' date='Jul 4 2002, 04:02 PM']i have the custom ito spec TID remember. there was only one unused hole which we capped off from the stock BOV. i'm gonna spray some carb cleaner around the engine and see if i can find some vacuum leaks
mike is gonna come over and help out..... you have any tips for doing the timing ? we aligned the timing to the first yellow mark on L 1[/quote] Just do it like the factory manual says to do it. Did you use a timing light?[/quote] we used a timing light. i have to print it out from the factory service manual. i have a feeling the TPS is bad[/quote] I have a spare. |
ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
|
Originally Posted by vosko' date='Jul 4 2002, 10:26 PM
ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
|
Originally Posted by 13BAce' date='Jul 4 2002, 08:28 PM
[quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok: |
Originally Posted by vosko' date='Jul 4 2002, 10:29 PM
[quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM? |
Originally Posted by 13BAce' date='Jul 4 2002, 09:19 PM
[quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png |
Originally Posted by vosko' date='Jul 5 2002, 12:37 AM
[quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use? |
Originally Posted by 13BAce' date='Jul 4 2002, 10:39 PM
[quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif |
Originally Posted by vosko' date='Jul 5 2002, 12:44 AM
[quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P |
Originally Posted by 13BAce' date='Jul 4 2002, 10:56 PM
[quote name='vosko' date='Jul 5 2002, 12:44 AM'][quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P[/quote] turborotor might stop by and help a BROTHA out https://www.nopistons.com/forums/pub...#>/biggrin.png |
Originally Posted by vosko' date='Jul 5 2002, 12:58 AM
[quote name='13BAce' date='Jul 4 2002, 10:56 PM'][quote name='vosko' date='Jul 5 2002, 12:44 AM'][quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P[/quote] turborotor might stop by and help a BROTHA out https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] I'm not in the mood for 3 hours in the "sweatbox." https://www.nopistons.com/forums/pub...>/rolleyes.gif |
Originally Posted by 13BAce' date='Jul 5 2002, 12:24 AM
[quote name='vosko' date='Jul 5 2002, 12:58 AM'][quote name='13BAce' date='Jul 4 2002, 10:56 PM'][quote name='vosko' date='Jul 5 2002, 12:44 AM'][quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P[/quote] turborotor might stop by and help a BROTHA out https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] I'm not in the mood for 3 hours in the "sweatbox." https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] hmm. i just noticed the grommets for the fuel injectors are hard like a rock. i'm gonna call ito and see if he has new ones i can buy then put it all together again and see what happens. |
Originally Posted by vosko' date='Jul 5 2002, 12:17 PM
[quote name='13BAce' date='Jul 5 2002, 12:24 AM'][quote name='vosko' date='Jul 5 2002, 12:58 AM'][quote name='13BAce' date='Jul 4 2002, 10:56 PM'][quote name='vosko' date='Jul 5 2002, 12:44 AM'][quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P[/quote] turborotor might stop by and help a BROTHA out https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] I'm not in the mood for 3 hours in the "sweatbox." https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] hmm. i just noticed the grommets for the fuel injectors are hard like a rock. i'm gonna call ito and see if he has new ones i can buy then put it all together again and see what happens.[/quote] It's worth a try. |
Originally Posted by 13BAce' date='Jul 5 2002, 10:19 AM
[quote name='vosko' date='Jul 5 2002, 12:17 PM'][quote name='13BAce' date='Jul 5 2002, 12:24 AM'][quote name='vosko' date='Jul 5 2002, 12:58 AM'][quote name='13BAce' date='Jul 4 2002, 10:56 PM'][quote name='vosko' date='Jul 5 2002, 12:44 AM'][quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P[/quote] turborotor might stop by and help a BROTHA out https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] I'm not in the mood for 3 hours in the "sweatbox." https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] hmm. i just noticed the grommets for the fuel injectors are hard like a rock. i'm gonna call ito and see if he has new ones i can buy then put it all together again and see what happens.[/quote] It's worth a try.[/quote] when i swapped in my injectors the car wouldn't even start :( |
Originally Posted by vosko' date='Jul 5 2002, 12:19 PM
[quote name='13BAce' date='Jul 5 2002, 10:19 AM'][quote name='vosko' date='Jul 5 2002, 12:17 PM'][quote name='13BAce' date='Jul 5 2002, 12:24 AM'][quote name='vosko' date='Jul 5 2002, 12:58 AM'][quote name='13BAce' date='Jul 4 2002, 10:56 PM'][quote name='vosko' date='Jul 5 2002, 12:44 AM'][quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P[/quote] turborotor might stop by and help a BROTHA out https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] I'm not in the mood for 3 hours in the "sweatbox." https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] hmm. i just noticed the grommets for the fuel injectors are hard like a rock. i'm gonna call ito and see if he has new ones i can buy then put it all together again and see what happens.[/quote] It's worth a try.[/quote] when i swapped in my injectors the car wouldn't even start :([/quote] You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif |
Originally Posted by 13BAce' date='Jul 5 2002, 11:12 AM
[quote name='vosko' date='Jul 5 2002, 12:19 PM'][quote name='13BAce' date='Jul 5 2002, 10:19 AM'][quote name='vosko' date='Jul 5 2002, 12:17 PM'][quote name='13BAce' date='Jul 5 2002, 12:24 AM'][quote name='vosko' date='Jul 5 2002, 12:58 AM'][quote name='13BAce' date='Jul 4 2002, 10:56 PM'][quote name='vosko' date='Jul 5 2002, 12:44 AM'][quote name='13BAce' date='Jul 4 2002, 10:39 PM'][quote name='vosko' date='Jul 5 2002, 12:37 AM'][quote name='13BAce' date='Jul 4 2002, 09:19 PM'][quote name='vosko' date='Jul 4 2002, 10:29 PM'][quote name='13BAce' date='Jul 4 2002, 08:28 PM'][quote name='vosko' date='Jul 4 2002, 10:26 PM']ok one vacuum hose popped off. car idled but if you give it gas and let off it hunts for the idle. i got it to idle perfect at 1500rpm... maybe i'll keep it that way and tell people its got a giant street port so it has to idle high https://www.nopistons.com/forums/pub...>/rolleyes.gif
my thoughts exactly :bigok:[/quote] How is it below 1500 RPM?[/quote] under 3000 rpm in partial throttle sounds like its running on one rotor. mike and i just swapped in my injectors and rails. now it won't run at all. sounds like its not getting any fuel. you have to floor it then it will run at like 400rpm. i don't have work till tomorrow afternoon so i'm gonna swap them AGAIN. this car really doesn't like me https://www.nopistons.com/forums/pub...DIR#>/wink.png[/quote] Check for vacuum leaks. It's possible that the intake manifold has a crack somewhere. Which ones did you use?[/quote] i'm using basically all the JDM parts. i don't hear a vacuum leak even though i did find two popped off vacuum hoses. sneaky little bastards https://www.nopistons.com/forums/pub...DIR#>/wink.png i'm gonna swap the fuel injectors and rails again. i'll go from there. you wanna come by tomorrow morning https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] No thanks. :P[/quote] turborotor might stop by and help a BROTHA out https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] I'm not in the mood for 3 hours in the "sweatbox." https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] hmm. i just noticed the grommets for the fuel injectors are hard like a rock. i'm gonna call ito and see if he has new ones i can buy then put it all together again and see what happens.[/quote] It's worth a try.[/quote] when i swapped in my injectors the car wouldn't even start :([/quote] You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] i know. i'm about ready to give up. spent alot of time and money and still don't have any working cars. what a surprise https://www.nopistons.com/forums/pub...>/rolleyes.gif |
Originally Posted by vosko' date='Jul 5 2002, 01:28 PM
[quote name='13BAce' date='Jul 5 2002, 11:12 AM']You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif
Buy my 81 Tercel. https://www.nopistons.com/forums/pub...>/rolleyes.gif |
Originally Posted by 13BAce' date='Jul 5 2002, 02:20 PM
[quote name='vosko' date='Jul 5 2002, 01:28 PM'][quote name='13BAce' date='Jul 5 2002, 11:12 AM']You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif
Buy my 81 Tercel. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] that's too much power for me. i'm looking for a huffy |
Originally Posted by vosko' date='Jul 5 2002, 04:30 PM
[quote name='13BAce' date='Jul 5 2002, 02:20 PM'][quote name='vosko' date='Jul 5 2002, 01:28 PM'][quote name='13BAce' date='Jul 5 2002, 11:12 AM']You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif
Buy my 81 Tercel. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] that's too much power for me. i'm looking for a huffy[/quote] Are you getting a little bell for it? |
Originally Posted by 13BAce' date='Jul 5 2002, 03:02 PM
[quote name='vosko' date='Jul 5 2002, 04:30 PM'][quote name='13BAce' date='Jul 5 2002, 02:20 PM'][quote name='vosko' date='Jul 5 2002, 01:28 PM'][quote name='13BAce' date='Jul 5 2002, 11:12 AM']You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif
Buy my 81 Tercel. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] that's too much power for me. i'm looking for a huffy[/quote] Are you getting a little bell for it?[/quote] yeah and one of those wheel powered lights. those are awesome |
I'm having similar idle problems with my TII... it won't idle below 1300 RPMs... this was before and after the haltech... before the haltech it wouldn't idle below 1300 hardly at all...now it will idle below 1300 but it sounds like it's running on one rotor, engine shakes real bad (causes BOV to tap side of the bay, annoying)...
I also have a new problem though... when just revving the engine it revs fine and sounds golden....but when i put a load on it I hear a sparatic ticking sound... sometimes it does it, sometimes it doesn't.... sounds like it's coming from the left side (driver seat point of view) of the engine.... and I can feel a slight draw when it does it also... I do have a bearing going out on my idler pulley, but I don't think that's it and my father swears up and down that it isn't.... other symptoms include : when not in boost there is a slight misfire/hesitation/jerk... but anything above 3000 RPMs and it's golden, except for the ticking sound crap.... I'm not sure what the problem is so I have refrained from driving the car for now... gonna tear it apart this weekend....any advice is apreciated... |
i'm still working on mine...... i have no clue what the problem is. if 13BAce would stop by my house i'm sure it would be fixed by now https://www.nopistons.com/forums/pub...>/rolleyes.gif
|
Originally Posted by Rxtasy' date='Jul 5 2002, 08:22 PM
I'm having similar idle problems with my TII... it won't idle below 1300 RPMs... this was before and after the haltech... before the haltech it wouldn't idle below 1300 hardly at all...now it will idle below 1300 but it sounds like it's running on one rotor, engine shakes real bad (causes BOV to tap side of the bay, annoying)...
I also have a new problem though... when just revving the engine it revs fine and sounds golden....but when i put a load on it I hear a sparatic ticking sound... sometimes it does it, sometimes it doesn't.... sounds like it's coming from the left side (driver seat point of view) of the engine.... and I can feel a slight draw when it does it also... I do have a bearing going out on my idler pulley, but I don't think that's it and my father swears up and down that it isn't.... other symptoms include : when not in boost there is a slight misfire/hesitation/jerk... but anything above 3000 RPMs and it's golden, except for the ticking sound crap.... I'm not sure what the problem is so I have refrained from driving the car for now... gonna tear it apart this weekend....any advice is apreciated... |
Originally Posted by vosko' date='Jul 5 2002, 06:22 PM
[quote name='13BAce' date='Jul 5 2002, 03:02 PM'][quote name='vosko' date='Jul 5 2002, 04:30 PM'][quote name='13BAce' date='Jul 5 2002, 02:20 PM'][quote name='vosko' date='Jul 5 2002, 01:28 PM'][quote name='13BAce' date='Jul 5 2002, 11:12 AM']You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif
Buy my 81 Tercel. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] that's too much power for me. i'm looking for a huffy[/quote] Are you getting a little bell for it?[/quote] yeah and one of those wheel powered lights. those are awesome[/quote] I have a radio that will clip onto the handlebars. |
Originally Posted by vosko' date='Jul 5 2002, 08:50 PM
i'm still working on mine...... i have no clue what the problem is. if 13BAce would stop by my house i'm sure it would be fixed by now https://www.nopistons.com/forums/pub...>/rolleyes.gif
|
Originally Posted by 13BAce' date='Jul 5 2002, 07:30 PM
[quote name='vosko' date='Jul 5 2002, 06:22 PM'][quote name='13BAce' date='Jul 5 2002, 03:02 PM'][quote name='vosko' date='Jul 5 2002, 04:30 PM'][quote name='13BAce' date='Jul 5 2002, 02:20 PM'][quote name='vosko' date='Jul 5 2002, 01:28 PM'][quote name='13BAce' date='Jul 5 2002, 11:12 AM']You have strange problems. https://www.nopistons.com/forums/pub...>/rolleyes.gif
Buy my 81 Tercel. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote] that's too much power for me. i'm looking for a huffy[/quote] Are you getting a little bell for it?[/quote] yeah and one of those wheel powered lights. those are awesome[/quote] I have a radio that will clip onto the handlebars.[/quote] sweet!!! how much do those go for ??? $2000 ? https://www.nopistons.com/forums/pub...>/rolleyes.gif |
Originally Posted by 13BAce' date='Jul 5 2002, 07:31 PM
[quote name='vosko' date='Jul 5 2002, 08:50 PM']i'm still working on mine...... i have no clue what the problem is. if 13BAce would stop by my house i'm sure it would be fixed by now https://www.nopistons.com/forums/pub...>/rolleyes.gif
cool. i might be on the lookout for a GTUs if i can't get one of these damn turbo rx7's reliable soon |
| All times are GMT -5. The time now is 05:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands