How to use a radiator back-flush kit on a rotary?
03-31-2007, 11:28 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2005
Location: Greenville / Sanford, NC
Posts: 222
Ok, so I tried hooking up one of those radiator back-flush kits, and I think I put it on the wrong spot. After reading the directions, it sounds like it hooks up to the heater hose that goes INTO the heater. After looking at the workshop manual, it looks like THAT hose is behind the rear rotor housing. Well, I just took a photo, and the hose on top says "fuel line." Is it the hose on the bottom?
04-01-2007, 12:13 AM
#2
Senior Member
Thread Starter
Join Date: Nov 2005
Location: Greenville / Sanford, NC
Posts: 222
Okay, n/m, the heater hose is actually there..in the background.
I also found a great write-up here: http://www.rx7club.com/archive/index.php/t-485756.html
...in case anyone was interested. I plan to try this out in the morning.
I also found a great write-up here: http://www.rx7club.com/archive/index.php/t-485756.html
...in case anyone was interested. I plan to try this out in the morning.
Thread
Thread Starter
Forum
Replies
Last Post
sharkbaitnclearwater
Vintage Mazda Rotary
0
04-30-2013 09:45 AM
cpracing
2nd Generation Specific
34
06-22-2004 05:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)