Hesitation Question
#1
i have an 87 gxl and the car hesitates at around 3k and 5k rpm, ive tried a few things, grounding kit, ran more power to the alternator and starter, just did a compression test both rotory housings are 90psi, so the engines still good, i can hear an exhaust leak and im planning on replacing all the gaskets, any other suggestions what could be causing the hesitations?
#4
You know...I grounded my injectors and replaced the fuel filter and changed the plugs and I'm STILL getting the stutter.
Are you backfiring? I was...big time. I started running premix (but haven't removed the OMP just yet) and it seemed to make a big difference. Granted, the hesitation is still there, but it's better. I think maybe we need to get our injectors cleaned and flowed. does anybody here know the best place to go for this?
Are you backfiring? I was...big time. I started running premix (but haven't removed the OMP just yet) and it seemed to make a big difference. Granted, the hesitation is still there, but it's better. I think maybe we need to get our injectors cleaned and flowed. does anybody here know the best place to go for this?
#5
does anybody here know the best place to go for this?
http://www.witchhunter.com/
Excellent service and the lowest price I've seen to date.
#7
Originally Posted by halfrice' date='Dec 14 2004, 10:07 PM
i have an 87 gxl and the car hesitates at around 3k and 5k rpm, ive tried a few things, grounding kit, ran more power to the alternator and starter, just did a compression test both rotory housings are 90psi, so the engines still good, i can hear an exhaust leak and im planning on replacing all the gaskets, any other suggestions what could be causing the hesitations?
Is it N/A or turboed?
#9
sounds like your aux ports and your vdi arent being opened... its an 87 so its using backpressure from the exhaust. is your split air pipe hooked up?
usually 5/6 ports open around (i believe) 3800 and the vdi opens about 5252 rpms...
check for a clogged cat, the split air pipe, your aux port actuators...
quick edit... i dont know if the s4's have VDI, i dont think so...
usually 5/6 ports open around (i believe) 3800 and the vdi opens about 5252 rpms...
check for a clogged cat, the split air pipe, your aux port actuators...
quick edit... i dont know if the s4's have VDI, i dont think so...
#10
Originally Posted by sleejay' date='Dec 20 2004, 09:23 PM
sounds like your aux ports and your vdi arent being opened... its an 87 so its using backpressure from the exhaust. is your split air pipe hooked up?
usually 5/6 ports open around (i believe) 3800 and the vdi opens about 5252 rpms...
check for a clogged cat, the split air pipe, your aux port actuators...
quick edit... i dont know if the s4's have VDI, i dont think so...
usually 5/6 ports open around (i believe) 3800 and the vdi opens about 5252 rpms...
check for a clogged cat, the split air pipe, your aux port actuators...
quick edit... i dont know if the s4's have VDI, i dont think so...
thanks, will try/check