harness mix up
05-04-2009, 04:15 PM
#2
Junior Member
Join Date: Aug 2007
Posts: 17
if you know only one of the 3 are a turbo harness then just set them side by side and look closely at them and you should be able to pick out the turbo harness from the 2 NA harnesses. other then that ill have a look at the ones i have to see how you can tell..
05-04-2009, 05:49 PM
#3
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
couple ways.
if the tag is still on it, the turbo is n370 NA is n350
they are basically identical, except the turbo has a knock sensor and a wastegate solenoid. the na has vdi and the 6 ports. the knock sensor is 1 wire, boost control is a blue 2 wire. the vdi and 6 ports just use the same normal solenoids as the rest of the system, so it'll have 2 more for those connectors
if the tag is still on it, the turbo is n370 NA is n350
they are basically identical, except the turbo has a knock sensor and a wastegate solenoid. the na has vdi and the 6 ports. the knock sensor is 1 wire, boost control is a blue 2 wire. the vdi and 6 ports just use the same normal solenoids as the rest of the system, so it'll have 2 more for those connectors
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)