I thought the piping was supposed to fit with the power steering pump in place. Is this true or do I need to take out my power steering? Man this is so frustrating I should be done by now.
|
the old style or the new style? i have the old style greddy and i still have the PS, the new style should fit it as well however
|
I have the new style. Directions are in japanese so I don't know what it's trying to tell me to do with the power steering pump lines that are blocking the pipe.
|
you must look at picture daniel san. it will fit but it is very tight.
http://www.cabrio7.org/mods/ic/P1010006-r.jpg |
J9fd3s I see what you did with the upper lines but what is to be done with the 2 small ones that are on the side of the pump? Do you have to bend those too?
Grasshopper you must be one with the instuctions. Sorry Miagi san but the ******* instructions are in Japanese and I'm a stupid white boy!!! |
you must only look at picture. thats what we did. these might help too http://www.cabrio7.org/mods/ic/
mike |
See that's what I don't get. This setup is supposed to meant for the 89-91 models and mine is a 90. I shouldn't be having these problems. I shouldn't heave to be cutting the pipe IMO.
|
Originally Posted by 7mech' date='May 27 2003, 11:15 AM
See that's what I don't get. This setup is supposed to meant for the 89-91 models and mine is a 90. I shouldn't be having these problems. I shouldn't heave to be cutting the pipe IMO.
mike |
where did you get that block for the coolant temp sensor that splices into the radiator?
|
Originally Posted by djgiantrobot' date='May 27 2003, 01:10 PM
where did you get that block for the coolant temp sensor that splices into the radiator?
mike |
All times are GMT -5. The time now is 11:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands