well, after many hours of labor, ranging from missing exhaust hanging equipment to that third turbo-dp bolt that is impossible to reach and tighten, it is finally on! https://www.nopistons.com/forums/pub...1047683329.gif
so i took it for a test drive, so see how it sounded, how it ran, and if i overboost. and the results are: 1. full boost comes on much quicker 2. my boost creeps up to 8.5 psi, and that before redline. i let off b/c i haven't bought an FCD. with my old exhaust i was hitting 6.5 psi at redline. 3. more low end toque, most likely b/c of the early boost. but in 4th gear at 40 mph, i actually could accellerate. 4. FAST. my car feels sooo much faster. seriously, the tarmac can barely contain my wheels https://www.nopistons.com/forums/pub...IR#>/bigok.gif few questions: i tightened that back bolt as good as i could, but when i looked around the turbo, i saw smoke. i'm going to assume this is due to the anti-seize around the bolts, and not an exhaust leak. if it still does it after a week or two, i'll try to tighten it up. here is my old exhaust: |
1 Attachment(s)
and the new exhaust:
|
1 Attachment(s)
|
so, as i was driving, and i was nearing 8-9 psi on boost, i let off to prevent fuel cut, which never happened.
the previous owner blew the engine b/c he boosted up to 20 psi due to a broken wastegate. i look at the pressure sensor, and what do i find? FDC!!!!!! sweet, now i dont have to spend $90 on one. i love saving money https://www.nopistons.com/forums/pub...IR#>/bigok.gif |
sell your old junk to mazdaenthused, he needs the mid section.
|
So after all this time and all the work you have done on the car you did not know you had the FDC? Makes you want to https://www.nopistons.com/forums/pub...1047683358.gif
Nice you don't have to spend the cash. |
1 Attachment(s)
the mid section isnt' stock. i dont know where it came from, or what brand it is. it's 2.5", same as the down pipe.
the exhaust is apexi rs racing series, i think. that's what the tail pipe says "RS Racing Series", and the side has a tag that looks like this: |
i thought the your old system didn't looks so stock but if it would bolt up to the stock down pipe i could sure as hell use it
|
that fcd was a nice find!
|
Can't wait to order my FCD.I'll need it. https://www.nopistons.com/forums/pub...1047683785.gif
|
All times are GMT -5. The time now is 09:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands