Got A Big List, Need Some Specs
#1
I'm gonna go back through my car and fix a bunch of stuff that i think may be wrong. So, I have some questions.''
1) What size are the downpipe nuts
2) What size and specs are the UIM / LIM nuts and where can i find them?
3) Omp bolts, what size are those
4) Someone told me to use the Metal LIM/engine gaskets, where can i find these?
5)Where is the best place to get Exhaust mani gsakets
6) I f i take the injectors out of the LIM, what do i need to replace and what parts should I buy.
7What size are the thermostate housing bolts
Finally, where would you recommend buying thses?
1) What size are the downpipe nuts
2) What size and specs are the UIM / LIM nuts and where can i find them?
3) Omp bolts, what size are those
4) Someone told me to use the Metal LIM/engine gaskets, where can i find these?
5)Where is the best place to get Exhaust mani gsakets
6) I f i take the injectors out of the LIM, what do i need to replace and what parts should I buy.
7What size are the thermostate housing bolts
Finally, where would you recommend buying thses?
#5
[quote name='Dramon_Killer' date='Apr 17 2005, 09:50 PM']I need specs for odering though, as in thread sizes too.
[/quote]
http://www.boltdepot.com/fastener-informat...hread-Gauge.pdf
sorry I can't be of more help. Your other method would be to buy a whole bunch of 14 mm hex bolts from homedepot, mark down the thread pitch for each of them and try your luck and go back to buy more. That is what I do most of hte time.
[snapback]701204[/snapback]
[/quote]
http://www.boltdepot.com/fastener-informat...hread-Gauge.pdf
sorry I can't be of more help. Your other method would be to buy a whole bunch of 14 mm hex bolts from homedepot, mark down the thread pitch for each of them and try your luck and go back to buy more. That is what I do most of hte time.
#6
clean and reuse the bolts, get yourself a wire wheel on a bench grinder, maybe even a tap and die set, either can be had for $40 and is a good "investment" for any project. You can also use a tumbler if you know anyone who makes thier own firearm rounds.
or are the bolts rounded off? A trip to the dealer looking at the microfishe should get you what you need.
or are the bolts rounded off? A trip to the dealer looking at the microfishe should get you what you need.
#8
[quote name='Dramon_Killer' date='Apr 17 2005, 02:52 PM']1) What size are the downpipe nuts[/quote]
10mm x 1.5
12mm flange head, so that means they are 8mm threads.
I *think* they are 1.0 thread, but don't quote me on that - it might be 1.25. :P
10mm flange head, so that means they are 6mm x 1.0.
For what engine?
Not all of the FC's have metal gasket option.
Someone online was selling annealed copper sheet ones that was cheaper than stock...
10mm x 1.25
10mm flange head or 12mm flange head?
I think it's 10mm...if it is, it's 6mm x 1.0.
-Ted
10mm x 1.5
2) What size and specs are the UIM / LIM nuts and where can i find them?
I *think* they are 1.0 thread, but don't quote me on that - it might be 1.25. :P
3) Omp bolts, what size are those
4) Someone told me to use the Metal LIM/engine gaskets, where can i find these?
Not all of the FC's have metal gasket option.
5)Where is the best place to get Exhaust mani gsakets
6) I f i take the injectors out of the LIM, what do i need to replace and what parts should I buy.
7What size are the thermostate housing bolts
[snapback]701082[/snapback]
I think it's 10mm...if it is, it's 6mm x 1.0.
-Ted
#9
[quote name='RETed' date='Apr 23 2005, 04:07 AM']10mm flange head or 12mm flange head?
I think it's 10mm...if it is, it's 6mm x 1.0.
-Ted
[/quote]
s4 is 2 12mm head bolts
s5 is 3 10mm head bolts
I think it's 10mm...if it is, it's 6mm x 1.0.
-Ted
[snapback]703633[/snapback]
[/quote]
s4 is 2 12mm head bolts
s5 is 3 10mm head bolts
Thread
Thread Starter
Forum
Replies
Last Post
RotaryResurrection
RX-7 & RX-8 Parts For Sale & Wanted
19
01-31-2004 07:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)