NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Getting T2 Started? (https://www.nopistons.com/2nd-generation-specific-17/getting-t2-started-33580/)

pengaru 02-13-2004 01:15 PM

when you crank it with the plugs pulled out, are you getting alot of fuel/mist blown out of the holes indicating fuel flooding?

rx7ahh 02-13-2004 05:07 PM

not to much if i put the egi fuse back in i would......i put a little more mmo in and turned it over with the fuse pulled and spark plugs out so im going to see what happens tommorow when i try to start it

rx7ahh 02-13-2004 05:08 PM

when i took the plugs out the first time the top ones were still wet but the bottom ones werent....im pretty sure all plugs are getting spark though.....i just forgot to add this in to my last post i still need to see what happens tommorow

Terrh 02-13-2004 08:38 PM

BY FAR, the easiest way to get an rx7 started:



requires: 1 chain, 1 friend, 1 other vehicle.

a chain can be substitued for a piece of carpet or something if chain isn't available. (push instead of pull)





Attach other vehicle to the rx7 and go! a clean paved surface with no traffic is ideal for this..



it WILL start with spark + fuel + compression, PERIOD.



Put the car in 2nd gear and hold the clutch pedal to the floor, release it when you get going about 10MPH. Be careful not to hit the other vehicle.



holding the engine at WOT seems to help, I don't know why.


All times are GMT -5. The time now is 04:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands