ok kids on a previous post i asked about fuel system upgrades and it was dumb for me to ask with the little knowlege of the car i was buying..but im back like a heart attack with the needed info.. now the the car is mine! ok the question is.. i need to upgrade my fuel system so i can up the bost going into my freshly broke in 13bt that is ported and polished. i also need to know what ecu you recomend (at a good price) preferably stand alone also.. but here are the specs on my beauty of an 88 rx7 tII.



new 13b morotr ported and polished to the 2nd stage specs. 3000 miles

custum built t4 flanged turbo

stainless high flow 45mm external wastegate with v band

turbo manifoldwith wastegate flange

fuel cut defencer

fmic with custom piping

turbo timer

electronic boost controler

act cluch

fluidine rad.

electric fan

drilled and sotted rotors

tein suspention

thats all that i can think of off my head now..

but i am looking to push 300-350 hp i dont wana over do the hp since i do road race.. but i wana play at the strip a bit and also a little drift session.. im just looking for an all around fast *** beast.. thanks for your help in advance guys.



nick dillon

endless excelleration

canton, ohio

 

dont everyone jump to help at once.. wow

 

Fuel pump: Walbro 255

Injectors: at least 780cc secondaries, and you can leave the primaries stock if you don't plan on running too much boost

ECU: We have a whole forum for that...go read up!

 

www.haltech.com are good .. a lot of guys run it, including me



www.getfuelinjected.com electromotiv tec2 and 3 are good...not as many cause theyre moer expensive but very good

 

Whats a stage 2 port job? Sounds like a ricer term... Do you have pics of the porting? Any exhaust porting? Upgrade to 1600cc secondaries, walrbo 255lpg and an adjustable fuel pressure regulator. Haltech or microtech for the ecu.

 

ok good thing i have the record book...



i do have pic of the port.. but sadly i have no way to get them on here...



what the respt says is.. 87-88 13bt remanuractured rotory engine, install gasket sets, clearenced rotors, port and polish intake and exhaust and

new rotors. i dont know where the stage 2came from.. its on one of these pages from atkins somewhere.. ok also have paper that says peripheral port 350HP " the powerband is from 5000-10000 rpms. so thats what the motor is...



and also i hear that with alot of the piggy back systems, the oem computer on the rx7 finds ways around it. and i dont want that.. im looking for standalone

 

What? Its a P-port motor??? Port and polish sounds like a mild streetport...

 

Damn your atkins papers say peripherial port on them?Thats going to be some mad power with the right snail yo!

 

Sounds like hes in WAY over his head, that or its not really a p-port.

 

HAHA