NoPistons -Mazda Rx7 & Rx8 Rotary Forum
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Flush coolant and oil change... (https://www.nopistons.com/2nd-generation-specific-17/flush-coolant-oil-change-7861/)

pengaru 11-16-2002 11:29 PM
Originally Posted by Baldy' date='Nov 17 2002, 04:15 AM
I'll try all this...and you'll probably hear a bunch more questions from me on Monday regarding this and oil changes...assuming my normal bad luck kicks in...(if the engine dumps oil and then a grinding sound, is that bad?....etc....)
you should invest in a mazda shop manual if you have not already :bigthumg:

Turbo II 11-16-2002 11:40 PM
haynes

Baldy 11-17-2002 08:07 PM
I redid the coolant change with distilled water, and took off the sensor when filling...afterwards everything was fine...thanks for the tips



I have a haynes manual



man, it helps a lot to have the wheel ramps...made a world of difference...I made sure to do it right this time

1Revvin7 11-17-2002 08:08 PM
Originally Posted by Baldy' date='Nov 17 2002, 09:07 PM
I redid the coolant change with distilled water, and took off the sensor when filling...afterwards everything was fine...thanks for the tips



I have a haynes manual



man, it helps a lot to have the wheel ramps...made a world of difference...I made sure to do it right this time
you can get your car up on wheel ramps???? my car is too low and its got stock suspension.

Baldy 11-17-2002 08:17 PM
yeah, it scraped a little on the front end...and I pushed it up by hand...my suspension is stock (much to my dismay)


All times are GMT -5. The time now is 03:25 PM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands