2nd Generation Specific 1986-1992 Discussion

flooding problem

Old Aug 1, 2002 | 04:21 AM
  #11  
horn4858's Avatar
Senior Member
 
Joined: Mar 2002
Posts: 441
From: forest city,n.c.
Default

seems like it helps to warm engine up everytime you crank it too. dont crank it for a short period on a cold winter day.
Old Aug 1, 2002 | 11:05 PM
  #12  
MDSRX7's Avatar
Junior Member
 
Joined: Oct 2001
Posts: 4
Default

A reply from the owner of an 88RX7. Where do I get this full position TPS.

and who has the custom shut off switch to eliminate pulling the EGI fuse

to solve flooding? I have used the Bleed-off valve from Mazdatrix, and it seemed to work but did not completely resolve the excess cranking

needed to start the engine. I have also, pulled my injectors and had them

cleaned and rebuilt to specification. It is far cheaper than buying new ones.

Go to the salvage yard and pull some out of the same type engine you

have, I got 4 for sixty bucks. you can look on the web at www. fuelinjectors.com, I used EPI at 1-800-893-2260, cost $105.00, far cheaper than new or even store bought rebuilds. They will inspect, test for leaks,

rebuild, and flow test, and provide documentation showing the rebuild to

be in compliance w/ mfg specs.



Despite doing all I have done this thing is still hard to start after it sits for a day, once started it runs fine. Can anyone help me with this problem?
Old Aug 2, 2002 | 08:12 PM
  #13  
Rob x-7's Avatar
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

To the right of the steering column under the dash is a plug with about 10 wires or so in it, I believe one side of it is yellow, at least it is on my cars. In that plug is 2 blue wires, snip either one running it to a on/off switch, then back to the blue wire you snipped, when your car gives you any sign of flooding, switch it to off, then when the car starts, switch it on right away. Or you can do it the complex and mindless way of running a switch from the fuel pump. My way means you run about 6" of wire and you will be done in about 5 minutes time ( depending where you want to mount the switch )
Old Aug 2, 2002 | 08:14 PM
  #14  
rotary88's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 210
From: savannah, GA
Default

in my 88gxl i put a fuel cut off switch right next to the security switch in the center console, fits in there pretty good to plus its kinda of like an anti theft device if u think about it
Old Aug 2, 2002 | 08:22 PM
  #15  
89 Rag's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 2,467
From: Portland, OR
Default

Originally Posted by Rob x-7' date='Aug 2 2002, 07:12 PM
To the right of the steering column under the dash is a plug with about 10 wires or so in it, I believe one side of it is yellow, at least it is on my cars. In that plug is 2 blue wires, snip either one running it to a on/off switch, then back to the blue wire you snipped, when your car gives you any sign of flooding, switch it to off, then when the car starts, switch it on right away. Or you can do it the complex and mindless way of running a switch from the fuel pump. My way means you run about 6" of wire and you will be done in about 5 minutes time ( depending where you want to mount the switch )
I like this, very simple and effective
Old Aug 2, 2002 | 08:39 PM
  #16  
Rob x-7's Avatar
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

Originally Posted by 89 Rag' date='Aug 2 2002, 09:22 PM
[quote name='Rob x-7' date='Aug 2 2002, 07:12 PM']To the right of the steering column under the dash is a plug with about 10 wires or so in it, I believe one side of it is yellow, at least it is on my cars. In that plug is 2 blue wires, snip either one running it to a on/off switch, then back to the blue wire you snipped, when your car gives you any sign of flooding, switch it to off, then when the car starts, switch it on right away. Or you can do it the complex and mindless way of running a switch from the fuel pump. My way means you run about 6" of wire and you will be done in about 5 minutes time ( depending where you want to mount the switch )
I like this, very simple and effective[/quote]

I should sell it as a kit on Ebay..... "BUY IT NOW FOR $29.95"
Old Aug 2, 2002 | 08:42 PM
  #17  
89 Rag's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 2,467
From: Portland, OR
Default

Originally Posted by Rob x-7' date='Aug 2 2002, 07:39 PM
[quote name='89 Rag' date='Aug 2 2002, 09:22 PM'][quote name='Rob x-7' date='Aug 2 2002, 07:12 PM']To the right of the steering column under the dash is a plug with about 10 wires or so in it, I believe one side of it is yellow, at least it is on my cars. In that plug is 2 blue wires, snip either one running it to a on/off switch, then back to the blue wire you snipped, when your car gives you any sign of flooding, switch it to off, then when the car starts, switch it on right away. Or you can do it the complex and mindless way of running a switch from the fuel pump. My way means you run about 6" of wire and you will be done in about 5 minutes time ( depending where you want to mount the switch )
I like this, very simple and effective[/quote]

I should sell it as a kit on Ebay..... "BUY IT NOW FOR $29.95"[/quote]

I would by it. what year is your ride...pre '89 ?
Old Aug 3, 2002 | 07:10 PM
  #18  
Rob x-7's Avatar
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

Originally Posted by 89 Rag' date='Aug 2 2002, 09:42 PM
[quote name='Rob x-7' date='Aug 2 2002, 07:39 PM'][quote name='89 Rag' date='Aug 2 2002, 09:22 PM'][quote name='Rob x-7' date='Aug 2 2002, 07:12 PM']To the right of the steering column under the dash is a plug with about 10 wires or so in it, I believe one side of it is yellow, at least it is on my cars. In that plug is 2 blue wires, snip either one running it to a on/off switch, then back to the blue wire you snipped, when your car gives you any sign of flooding, switch it to off, then when the car starts, switch it on right away. Or you can do it the complex and mindless way of running a switch from the fuel pump. My way means you run about 6" of wire and you will be done in about 5 minutes time ( depending where you want to mount the switch )
I like this, very simple and effective[/quote]

I should sell it as a kit on Ebay..... "BUY IT NOW FOR $29.95"[/quote]

I would by it. what year is your ride...pre '89 ?[/quote]

Its a 1988, on mine the plug as like 6-8 wires ( I looked under there today ), and mine has only one blue wire, but thats the wire you got to run the swith from.
Old Aug 5, 2002 | 02:28 PM
  #19  
MDSRX7's Avatar
Junior Member
 
Joined: Oct 2001
Posts: 4
Default

Originally Posted by Rob x-7' date='Aug 4 2002, 01:10 AM
[quote name='89 Rag' date='Aug 2 2002, 09:42 PM'][quote name='Rob x-7' date='Aug 2 2002, 07:39 PM'][quote name='89 Rag' date='Aug 2 2002, 09:22 PM'][quote name='Rob x-7' date='Aug 2 2002, 07:12 PM']To the right of the steering column under the dash is a plug with about 10 wires or so in it, I believe one side of it is yellow, at least it is on my cars. In that plug is 2 blue wires, snip either one running it to a on/off switch, then back to the blue wire you snipped, when your car gives you any sign of flooding, switch it to off, then when the car starts, switch it on right away. Or you can do it the complex and mindless way of running a switch from the fuel pump. My way means you run about 6" of wire and you will be done in about 5 minutes time ( depending where you want to mount the switch )
I like this, very simple and effective[/quote]

I should sell it as a kit on Ebay..... "BUY IT NOW FOR $29.95"[/quote]

I would by it. what year is your ride...pre '89 ?[/quote]

Its a 1988, on mine the plug as like 6-8 wires ( I looked under there today ), and mine has only one blue wire, but thats the wire you got to run the swith from.[/quote]

I put the switch on one of the blue wires, and cranked the engine, did not smell gas as before. Turned switch on , cranked engine, no start, battery weak, been sitting 2 weeks. Hooked up jumpers cranked engine, and she

fired rihgt up. No smoke first few minutes, then some white smoke, but not as much as before, due to less cranking. What is the connection that the

yellow/white plug fits into, some sort of relay? Can the same thing be done by putting the switch on the green/black wire coming from the bottom

of the EGI inj., fuse in the fuse panel under the hood? While the car was idling I turned the switch off, but the engine did not shut down, doesn't

the switch turn the injectores on/off?
Old Aug 5, 2002 | 04:57 PM
  #20  
Rob x-7's Avatar
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

Originally Posted by MDSRX7' date='Aug 5 2002, 03:28 PM
[quote name='Rob x-7' date='Aug 4 2002, 01:10 AM'][quote name='89 Rag' date='Aug 2 2002, 09:42 PM'][quote name='Rob x-7' date='Aug 2 2002, 07:39 PM'][quote name='89 Rag' date='Aug 2 2002, 09:22 PM'][quote name='Rob x-7' date='Aug 2 2002, 07:12 PM']To the right of the steering column under the dash is a plug with about 10 wires or so in it, I believe one side of it is yellow, at least it is on my cars. In that plug is 2 blue wires, snip either one running it to a on/off switch, then back to the blue wire you snipped, when your car gives you any sign of flooding, switch it to off, then when the car starts, switch it on right away. Or you can do it the complex and mindless way of running a switch from the fuel pump. My way means you run about 6" of wire and you will be done in about 5 minutes time ( depending where you want to mount the switch )
I like this, very simple and effective[/quote]

I should sell it as a kit on Ebay..... "BUY IT NOW FOR $29.95"[/quote]

I would by it. what year is your ride...pre '89 ?[/quote]

Its a 1988, on mine the plug as like 6-8 wires ( I looked under there today ), and mine has only one blue wire, but thats the wire you got to run the swith from.[/quote]

I put the switch on one of the blue wires, and cranked the engine, did not smell gas as before. Turned switch on , cranked engine, no start, battery weak, been sitting 2 weeks. Hooked up jumpers cranked engine, and she

fired rihgt up. No smoke first few minutes, then some white smoke, but not as much as before, due to less cranking. What is the connection that the

yellow/white plug fits into, some sort of relay? Can the same thing be done by putting the switch on the green/black wire coming from the bottom

of the EGI inj., fuse in the fuse panel under the hood? While the car was idling I turned the switch off, but the engine did not shut down, doesn't

the switch turn the injectores on/off?[/quote]

Listen, when the car wont start, you hit that switch, the car will no longer flood itself, it will however start, then you flip it back on, otherwise it will stall out. These cars DO NOT like weak batteries either, get yourself a good strong battery, I always say a Sears Die Hard Gold. I never tried hitting the switch while the car was running, why bother? And you flip the switch on AFTER the car starts, even if you flooded it a tiny bit, there will be enough gas to get the car going, you dont crank it then just hit the switch back to on when you feel like it, it wont work that way.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:43 AM.