a few little issues
first off im new to the site and new to rx7s so i apologize if this is a noob-ish thread, just got an 89 N/A rx7 i have a few minor issues that i cant really figure out. First is the most annoying one of my mounts is shot everytime i shift, let off the gas or even just cruising in gear my enigin trans or something is bouncing around hitting the belly of the car, the dude i got it from said tranny mount so i bought the trans mount from autozone took the mount off my car and it wasnt even close, he gave me a motor mount. now i have been looking everywere and i cant find any mounts that look like the one that i took off. i know i need the crossmember that holds the mount but i cant fint the rubber parts with the studs on them. next my oil pressure gauge and temp gauge dont work, i dont know why i havent even looked into it so i figured i would ask the pros. please let me kno any insight u may have and if somone could tell me were to get the trans mount that would be cool, thanks!
Here is the link to mazdatrix.com site that has the trans mount. http://mazdatrix.com/g3.htm
As for the oil pressure gauge, mine is currently not working because my oil pressuse switch is bad. I just ordered a new one at rockauto.com for 8.00 dollars plus shipping. They have a closeout special on one right now. I would have to check the manual on the temp gauge but the temp sending unit would be the first thing I would replace since they are usually pretty cheap.
As for the oil pressure gauge, mine is currently not working because my oil pressuse switch is bad. I just ordered a new one at rockauto.com for 8.00 dollars plus shipping. They have a closeout special on one right now. I would have to check the manual on the temp gauge but the temp sending unit would be the first thing I would replace since they are usually pretty cheap.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



