NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Fc3s Exhaust Systems Help (https://www.nopistons.com/2nd-generation-specific-17/fc3s-exhaust-systems-help-48627/)

FCRXTC 05-15-2005 05:19 PM

Whats the best diameter pipe to use? At the mo it's three inches from the turbo back with 1 resinator and custom muffler. This system is far to loud! I need to get the db level

down to about 85-90db so I can get a WOF

Should I split it half way down and run two 2inch pipes to two mufflers?

Also I really don't want to lose any power

Thanks

fc3sboy1 05-15-2005 05:38 PM

is this a turbo car or a na car. i ran the racing beat header and presilencer with a 60mm hks cat back and it was quiet, though louder then stock when wide open but not very loud.

if this is turbo weld in a 3" borla xr-1 race buller someplace just after the down pipe and then run a good muffler , use a stainless steel packed muffler like the borla. and also remove the resinator , that is actually increesing the volume of the exhaust note.

FCRXTC 05-15-2005 06:34 PM

[quote name='FCRXTC' date='May 16 2005, 10:19 AM']Whats the best diameter pipe to use? At the mo it's three inches from the turbo back with 1 resinator and custom muffler. This system is far to loud! I need to get the db level

down to about 85-90db so I can get a WOF

Should I split it half way down and run two 2inch pipes to two mufflers?

Also I really don't want to lose any power

Thanks

[snapback]713268[/snapback]

[/quote]

Yeah its a turbo, we don't have to run cats in New Zealand (yet). I'm not sure if I can get that Borla brand here, but thanks any way

Cheers! 05-15-2005 06:54 PM

[quote name='FCRXTC' date='May 15 2005, 06:34 PM']Yeah its a turbo, we don't have to run cats in New Zealand (yet). I'm not sure if I can get that Borla brand here, but thanks any way

[snapback]713283[/snapback]

[/quote]



How big is your presilencer? (length) which muffler do u have?

fc3sboy1 05-15-2005 06:56 PM

i run a 3.5 inch exhaust from the turbo to the tail pipe tip with the above mentioned borla muffler set up and its mid level noisey, i mean its not quiet but its not loud.

FCRXTC 05-15-2005 07:13 PM

[quote name='Cheers!' date='May 16 2005, 11:54 AM']How big is your presilencer? (length) which muffler do u have?

[snapback]713295[/snapback]

[/quote]



I think its about foot 1/2 or about 500cm long, the muffler is a custom one that they use on the race cars here, it's not HKS or anything like that. I think it's more for na cars like bridgeports


All times are GMT -5. The time now is 04:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands