2nd Generation Specific 1986-1992 Discussion

Estimate Hp?

Old 02-23-2004, 04:30 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Oct 2002
Posts: 265
Default

I am just finishing up putting together a T2 Engine, i can't wait to get it run in and on the Rollers.



Can anyone give me a estimate from experiance what i should expect to see?



My Spec is

Flowed primary plates

Aggressive Secondry Extended port

Exhaust ports flowed

FD Staitionary gears,Oil pump,Oil Reg etc

FD Inlet manifold

2x550 & 2x1200cc Injectors + Fuel Reg

Skyline Fuel Pump

FMIC

60-1 Turbo with a .96 (Undivided)

Tial 40mm wastgate

Microtech Lt8

And some other bits which have sliped my memory.



What would you guess? It will be running our Uk 97ron fuel and the boost is going to be around the 15-18psi mark.



Thanks





Chris
Grizzly is offline  
Old 02-23-2004, 04:32 PM
  #2  
Senior Member
 
Join Date: Apr 2003
Location: Schofield Barracks, HI
Posts: 2,259
Default

350s
FrestyleFC3S is offline  
Old 02-23-2004, 04:36 PM
  #3  
Senior Member
Thread Starter
 
Join Date: Oct 2002
Posts: 265
Default

Is that at the Wheels?
Grizzly is offline  
Old 02-23-2004, 04:38 PM
  #4  
Senior Member
 
Join Date: May 2002
Location: California
Posts: 22,466
Default

should be closer to 400rwhp
j9fd3s is offline  
Old 02-23-2004, 04:55 PM
  #5  
Senior Member
 
Join Date: Apr 2003
Location: Schofield Barracks, HI
Posts: 2,259
Default

Originally Posted by j9fd3s' date='Feb 23 2004, 06:38 PM
should be closer to 400rwhp
i was gonna put 350-400...but who knows...i dunno what kinda ports
FrestyleFC3S is offline  
Old 02-23-2004, 05:56 PM
  #6  
Senior Member
 
Join Date: Oct 2003
Location: Boston Ma.
Posts: 1,420
Default

Originally Posted by Grizzly' date='Feb 23 2004, 02:30 PM
What would you guess? It will be running our Uk 97ron fuel and the boost is going to be around the 15-18psi mark.



Thanks





Chris
18 psi is alot of boost for a heavily ported engine. I would work the psi in slowly to see what the safe limit is for your setup. Could be 10 psi or could be 20 psi, and people brag about psi but at the end of the day its who ended up in front.

Rant over!
RONIN FC is offline  
Old 02-23-2004, 05:57 PM
  #7  
Senior Member
 
Join Date: Apr 2003
Location: Schofield Barracks, HI
Posts: 2,259
Default

Originally Posted by RONIN FC' date='Feb 23 2004, 07:56 PM
and people brag about psi but at the end of the day its who ended up in front.
that....and whose still got a steady vacuum pressure...
FrestyleFC3S is offline  
Old 02-23-2004, 06:20 PM
  #8  
Senior Member
 
Join Date: Oct 2001
Location: Peoria, AZ
Posts: 10,906
Default

Until you post pixs of the porting, I'm going to say 420rwhp.
1Revvin7 is offline  
Old 02-23-2004, 06:56 PM
  #9  
Senior Member
 
Join Date: Jan 2003
Location: London, Ontario
Posts: 2,871
Default

I don't think he has enough gas for that much power guys.



Max Coopers Calc.
TYSON is offline  
Old 02-23-2004, 09:19 PM
  #10  
Senior Member
 
Join Date: Nov 2002
Location: Colorado Springs
Posts: 1,679
Default

not nearly enough injector, get bigger
Apex13B is offline  

Thread Tools
Search this Thread
Quick Reply: Estimate Hp?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.